Rod & Handle Tools
-
10-Piece Curved PDR Rod Set – 20/30/40/45/60cm, Ø5/6/8mm
Reach the dents straight rods can't. This 10-piece curved PDR rod set is shaped for tight, awkward access points – behind door braces, inside quarter panels and under hood edges – where a straight rod loses leverage before it reaches the dent. Best for: door panels, fenders, quarter panels and complex hail damage on curved body lines. Spring steel construction – flexes under load and snaps back without kinking Progressive curve profiles – shallow sweeps for panel work, deep bends for boxed sections Five lengths, three diameters – thin short rods for precision, thick long rods for leverage Comfort-grip handles on every rod In the set: 10 curved rods covering 20–60 cm in Ø5, Ø6 and Ø8 mm. Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€199,90
-
Minimal Hook Set - 3 Pieces - PDR Tools – 20/20/25cm, Ø5/6/5mm
A spring steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. spring steel construction – controlled flex, no kinking 20, 20, 25 cm, Ø5, 6, 5 mm – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€69,90
-
3-Piece Adjustable Handle Rod Set - PDR Tools – 40/60/90cm, Ø8mm
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 40, 60, 90 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€120,00 €99,90
-
3-Piece 360° Adjustable Handle Curved PDR Rod Set – 35/50/60cm, Ø6/8/8mm
Rotate the handle, not your body. These three curved rods carry 360° adjustable handles that lock at any angle, so in cramped working positions you set the grip to suit your stance and keep full control of the tip.Best for: awkward working positions – kneeling at sills, reaching over engine bays, working under-panel. 360° locking handles – any grip angle, locked solid Curved shafts for access around edges and braces 35 / 50 / 60 cm lengths, Ø6–8 mm spring steel Reduces wrist fatigue on long repair sessions In the set: 3 curved rods with 360° adjustable handles: 35, 50 and 60 cm.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€89,90
-
M8 Double Bend Interchangeable Rod 120 CM – 120cm, Ø12mm
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking 120 cm, Ø12 mm – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€65,00 €54,90
-
4-Piece Short Curved PDR Rod Set – 20/25cm, Ø5/6mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Spring Steel construction – controlled flex, no kinking 20, 25 cm, Ø5, 6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€64,90
-
M8 Interchangeable Tip Double Bend Rod 90 cm 12 mm
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking 90 cm, Ø12 mm – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00 €44,90
-
6-Piece Double Bend Curved PDR Rod Set – 25/40/55cm, Ø8mm
Two bends put the tip where one can't. The double bend geometry of this 6-piece curved rod set lets the shaft clear a brace or inner panel edge and still land the tip flat on the dent – the go-to profile for obstructed repairs.Best for: dents hiding behind braces, reinforcements and inner panel structures. Double bend profile clears obstructions while keeping tip control 25 / 40 / 55 cm lengths for shallow and deep obstructed sections Ø8 mm spring steel – stiffness for real corrective force Comfort grips for high-leverage work In the set: 6 double bend curved rods: 25, 40 and 55 cm, Ø8 mm.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€109,90
-
4-Piece Adjustable Handle - PDR Tools – 25/30/40/50cm, Ø6mm
Fits through a door drain hole – customers have proven it. These four adjustable-handle rods (25–50 cm, Ø6 mm) are slim enough to enter through factory openings and the locking handle sets your grip angle so the tip lands square on the dent.Best for: door skins accessed through drain holes and window slots – no trim removal needed. Adjustable locking handle – set the working angle, not your wrist Slim Ø6 mm shafts pass through factory drain holes 25 / 30 / 40 / 50 cm lengths for every door size Spring steel with controlled flex for precise pushes In the set: 4 adjustable-handle rods: 25, 30, 40 and 50 cm, Ø6 mm.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€110,00 €99,90
-
M8 Interchangeable Tip Set
One rod, many tips. This M8-thread interchangeable tip set lets a single rod do the work of a rack: screw on the profile the dent demands – round for smooth pushes, sharp for precise crowns, soft for finishing – and keep working.Best for: technicians running M8 interchangeable rods who want the full tip vocabulary at hand. Standard M8 thread – fits our interchangeable rods and most industry M8 systems Multiple tip profiles for pushing, detailing and finishing Hardened tips hold their geometry Compact organised storage Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€75,00 €64,90
-
6-Piece Hook PDR Rod Set – Spring Steel, 30/40/45cm, Ø5/6/8mm
Hooks that pull the dent toward you. This 6-piece hook PDR rod set puts a curved working tip on compact spring steel shafts, letting you apply force back toward yourself in cavities where a forward push is impossible.Best for: door internals, pillar sections and boxed panels where the dent sits behind the access point. Hook-profile tips for pull-direction corrections Compact 30 / 40 / 45 cm shafts steer easily inside cavities Three diameters (Ø5 / 6 / 8 mm) – match stiffness to panel gauge Spring steel: controlled flex, no kinking In the set: 6 hook rods: 30, 40 and 45 cm in Ø5, Ø6 and Ø8 mm.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€139,90
-
3-Piece 360° Adjustable Handle PDR Rod Set – 40/50/60cm, Ø8mm
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. Spring Steel construction – controlled flex, no kinking 40, 50, 60 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€99,90
-
6-Piece Short Curved PDR Rod Set – 15/25/35cm, Ø5mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 15, 25, 35 cm, Ø5 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€89,90
-
6-Piece Curved PDR Rod Set – 30/45/60cm, Ø5/6/8mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 60 cm, Ø5, 6, 8 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€150,00 €139,90
-
2-Piece Adjustable Handle Rod Special Curve - PDR Tools – 45/65cm, Ø10mm
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 45, 65 cm, Ø10 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€100,00 €89,90
-
5-Piece Hook PDR Rod Set – Spring Steel, 30/45/60/75/90cm, Ø5/6/8/10/12mm
A set of spring steel hook rods for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. Spring Steel construction – controlled flex, no kinking 30, 45, 60, 75, 90 cm, Ø5, 6, 8, 10, 12 mm – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€139,90
-
6-Piece Angled PDR Rod Set (Left/Right) – 30/45/65cm, Ø6/6/8mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 65 cm, Ø6, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€99,90
-
6-Piece PDR Rod Set with Ergonomic Handles – 25/35/45/60/70/90cm, Ø5/6/8/8/10/12mm
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking 25, 35, 45, 60, 70, 90 cm, Ø5, 6, 8, 8, 10, 12 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€159,90
-
4-Piece of Adjustable Handle Rod - PDR Tools – 45/50/60/70cm, Ø8mm
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 45, 50, 60, 70 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€130,00 €109,90
-
Special Curve for Aluminium Car Body Extra Sharp Set 6 Pcs
A aluminium curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Aluminium construction – controlled flex, no kinking Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€200,00 €170,00
-
2-Piece Adjustable Handle 360 Degree - 90cm/8mm
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 90 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€100,00 €89,90
-
6-Piece Spring Steel PDR Rod Set – 30/40/50cm, Ø6/6/8mm
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. Spring Steel construction – controlled flex, no kinking 30, 40, 50 cm, Ø6, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€120,00 €99,90
-
10-Piece Bracket Set Right Left - Flat End – 15/25/35/45/60cm, Ø5/6/6/6/8mm
A set of spring steel brace tools for paintless dent repair, built for working the tight gap between panel and brace.Best for: working the tight gap between panel and brace. spring steel construction – controlled flex, no kinking 15, 25, 35, 45, 60 cm, Ø5, 6, 6, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€150,00 €130,00
-
M8 Interchangeable Tip T- Rod 48"
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking 120 cm, Ø12 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00 €60,00
Vous avez vu 24 produits sur 75