Curved & Bent Rods
-
10-Piece Curved PDR Rod Set – 20/30/40/45/60cm, Ø5/6/8mm
Reach the dents straight rods can't. This 10-piece curved PDR rod set is shaped for tight, awkward access points – behind door braces, inside quarter panels and under hood edges – where a straight rod loses leverage before it reaches the dent. Best for: door panels, fenders, quarter panels and complex hail damage on curved body lines. Spring steel construction – flexes under load and snaps back without kinking Progressive curve profiles – shallow sweeps for panel work, deep bends for boxed sections Five lengths, three diameters – thin short rods for precision, thick long rods for leverage Comfort-grip handles on every rod In the set: 10 curved rods covering 20–60 cm in Ø5, Ø6 and Ø8 mm. Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€199,90
-
4-Piece Short Curved PDR Rod Set – 20/25cm, Ø5/6mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Spring Steel construction – controlled flex, no kinking 20, 25 cm, Ø5, 6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€64,90
-
6-Piece Double Bend Curved PDR Rod Set – 25/40/55cm, Ø8mm
Two bends put the tip where one can't. The double bend geometry of this 6-piece curved rod set lets the shaft clear a brace or inner panel edge and still land the tip flat on the dent – the go-to profile for obstructed repairs.Best for: dents hiding behind braces, reinforcements and inner panel structures. Double bend profile clears obstructions while keeping tip control 25 / 40 / 55 cm lengths for shallow and deep obstructed sections Ø8 mm spring steel – stiffness for real corrective force Comfort grips for high-leverage work In the set: 6 double bend curved rods: 25, 40 and 55 cm, Ø8 mm.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€109,90
-
6-Piece Short Curved PDR Rod Set – 15/25/35cm, Ø5mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 15, 25, 35 cm, Ø5 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€89,90
-
6-Piece Curved PDR Rod Set – 30/45/60cm, Ø5/6/8mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 60 cm, Ø5, 6, 8 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€150,00 €139,90
-
6-Piece Angled PDR Rod Set (Left/Right) – 30/45/65cm, Ø6/6/8mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 65 cm, Ø6, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€99,90
-
Special Curve for Aluminium Car Body Extra Sharp Set 6 Pcs
A aluminium curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Aluminium construction – controlled flex, no kinking Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€200,00 €170,00
-
2-Piece Curved PDR Rod Set (Yellow) – 45cm, Ø6mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 45 cm, Ø6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00 €54,90
-
Double Bend Curved PDR Rod (Red) – 60cm, Ø8mm
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm, Ø8 mm – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00 €44,90
-
10-Piece Double Bend PDR Rod Set (Left/Right) – 25/35/45/55/65cm, Ø5/6/8mm
Left and right of every brace. This 10-piece double bend set comes in mirrored left/right pairs, so whichever side of an obstruction the dent sits on, there is a rod bent the right way to reach it.Best for: hail repair on braced roofs and hoods, where dents fall on both sides of every reinforcement. Mirrored left/right pairs – no forcing a wrong-handed rod into position Five lengths from 25 to 65 cm cover shallow and deep sections Ø5 / 6 / 8 mm spring steel shafts The most efficient setup for high-count hail work In the set: 10 double bend rods in L/R pairs: 25 / 35 / 45 / 55 / 65 cm, Ø5–8 mm.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€200,00 €170,00
-
2-Piece Curved PDR Rod Set (Yellow) – 40cm, Ø5mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 40 cm, Ø5 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€64,90
-
Curved PDR Rod (Red) – 55cm, Ø10mm
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm, Ø10 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00 €44,90
-
2-Piece Curved PDR Rod Set – 55cm, Ø8mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm, Ø8 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00 €54,90
-
2-Piece Curved PDR Rod Set – 35cm, Ø6mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 35 cm, Ø6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
2-Piece Curved PDR Rod Set – 30cm, Ø5mm (Black)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30 cm, Ø5 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Black handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00 €54,90
-
2-Piece Curved PDR Rod Set (Green) – 45cm, Ø6mm
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 45 cm, Ø6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Green handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00 €54,90
-
Double Bend Sharp Tip PDR Rod
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
Single Bend Flat Tip PDR Rod
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
Flat Tip PDR Rod
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
5-Piece One Bend Sharp End Rod Set
A set of stainless steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€180,00
-
2-Piece One Bend and Sharp End Rod Set
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€110,00
-
Curved PDR Rod (Blue) – 60cm, Ø8mm
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm, Ø8 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Blue handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00 €44,90
