Side Panel & Door Tools

Professional PDR Tools 5-Piece 360° Adjustable Handle PDR Rod Set Built for professional paintless dent repair. Five spring-steel PDR rods combine multiple lengths, 55° and 90° working angles and fully adjustable handles for precise access and controlled pushing. 5 PCS Complete Set 360° Adjustable Handle Ø8 mm 5/16" Rod Diameter 55° / 90° Working Angles Built for Control Designed around the technician. Different shaft lengths and working angles allow the set to adapt to multiple access points while maintaining controlled leverage during dent repair. 01 360° Adjustable Handle Rotate and position the handle through 360 degrees to find the most comfortable leverage position for each access point. 02 Spring Steel Construction Manufactured from durable spring steel to provide the rigidity, controlled flex and resistance required for professional PDR applications. 03 Ø8 mm / 5/16" Rods The 8 mm rod diameter provides a strong balance between pushing power and accessibility behind vehicle body panels. 04 Multiple Working Angles A combination of 55° and 90° working ends provides different pushing positions for restricted and difficult-to-access repair areas. 360° One handle. Any working position. The adjustable handle allows the technician to change the hand position without changing the working angle of the rod, improving comfort and control when working around different vehicle panels. Technical Specifications Five rods. Three reach lengths. Two working angles. Rod Main Shaft Working End Angle Diameter Rod 01 190 mm / 7.48" 110 mm / 4.33" 55° Ø8 mm / 5/16" Rod 02 190 mm / 7.48" 110 mm / 4.33" 90° Ø8 mm / 5/16" Rod 03 340 mm / 13.39" 110 mm / 4.33" 90° Ø8 mm / 5/16" Rod 04 490 mm / 19.29" 130 mm / 5.12" 55° Ø8 mm / 5/16" Rod 05 490 mm / 19.29" 130 mm / 5.12" 90° Ø8 mm / 5/16" Main shaft measurements are taken from the handle connection to the bend area. Working-end measurements refer to the section after the bend. Professional Applications Access where you need it. ✓ Door Panels ✓ Roof Panels ✓ Quarter Panels ✓ Fenders ✓ Hood & Trunk ✓ Restricted Access Areas Inside The Set 5 Professional PDR Rods Ready for professional dent repair. ✓ Spring steel construction ✓ 360° adjustable handles ✓ Ø8 mm / 5/16" rod diameter ✓ 55° & 90° working angles ✓ Short, medium and long reach configurations

Read more less

A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking 20, 20, 30, 45, 45, 60, 70 cm (7.9, 7.9, 11.8, 17.7, 17.7, 23.6, 27.6″), Ø5, 6, 8 mm (0.20, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

Минимальный набор крючков - 3 шт. Эти палочки сделаны из пружинной стали. Небьющийся материал. Измерения следующие: 1.Палка 20 см / 5 мм 2.Палка 25 см / 6 мм 3.Палка 25 см / 8 мм Гарантия 1 год.

Read more less

Maçka Set - набор из 6 пружинных стальных стержней Эти стержни изготовлены из пружинной стали. Небьющийся материал. Измерения следующие: Диаметры 5мм, 6мм, 8мм Длина 30см,40см,45см Гарантия 1 год.

Read more less

A set of spring steel brace tools for paintless dent repair, built for working the tight gap between panel and brace.Best for: working the tight gap between panel and brace. spring steel construction – controlled flex, no kinking 15, 25, 35, 45, 60 cm (5.9, 9.8, 13.8, 17.7, 23.6″), Ø5, 6, 6, 6, 8 mm (0.20, 0.24, 0.24, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

Emirgan Set - набор из 3 пружинных стальных стержней Эти стержни изготовлены из пружинной стали. Небьющийся материал. Измерения следующие: Диаметры: 5 мм-6 мм Длина: 45 см-60 см-90 см Гарантия 1 год.

Read more less

Fits through a door drain hole – customers have proven it. These four adjustable-handle rods (25–50 cm (9.8–19.7″), Ø6 mm (0.24″)) are slim enough to enter through factory openings and the locking handle sets your grip angle so the tip lands square on the dent.Best for: door skins accessed through drain holes and window slots – no trim removal needed. Adjustable locking handle – set the working angle, not your wrist Slim Ø6 mm (0.24″) shafts pass through factory drain holes 25 / 30 / 40 / 50 cm (9.8 / 11.8 / 15.7 / 19.7″) lengths for every door size Spring steel with controlled flex for precise pushes In the set: 4 adjustable-handle rods: 25, 30, 40 and 50 cm (9.8, 11.8, 15.7 and 19.7″), Ø6 mm (0.24″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

Минимальный набор крючков - 3 шт. Эти палочки сделаны из пружинной стали. Небьющийся материал. Измерения следующие: 1.Палка 20 см / 5 мм 2.Палка 25 см / 6 мм 3.Палка 25 см / 8 мм Гарантия 1 год.

Read more less

2 шт. удилища палки крючок черный Эти удилища сделаны из пружинной стали. Небьющийся материал. Размеры: длина: 60/40 см, диаметр: 5 мм. Гарантия 1 год.

Read more less

Двойной изогнутый крючок-палка, красный Эта палка с двойным изгибом изготовлена ​​из пружинной стали. Небьющийся материал. Размеры: длина 83 см, диаметр 12 мм. Гарантия 1 год.

Read more less