SAVE100 Eligible Products
-
Клеевые язычки 50 шт.
Glue-pull tab for paintless dent removal without rear access. This 12020- 50*27mm (1.06″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12020- 50*27mm (1.06″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Клеевые язычки 50 шт.
Glue-pull tab for paintless dent removal without rear access. This 11333-1- 21,5mm (0.04- 0.85″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11333-1- 21,5mm (0.04- 0.85″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
1-Piece Stainless Steel Single Bend PDR Rod (Sharp Tip)
A curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking Curved profile for the intended access geometry Comfort grip for extended sessions Measurements: Lengths: 30 cm (11.8″) — Diameters: Ø5 mm (0.20″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL. 35-35-40-45-50-55
€35,00
-
6-Piece Stainless Steel Single Bend PDR Rod Set (Sharp Tip)
A curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking Curved profile for the intended access geometry Comfort grip for extended sessions Measurements: Lengths: 30 / 45 / 60 / 75 / 90 / 110 cm (11.8 / 17.7 / 23.6 / 29.5 / 35.4 / 43.3″) — Diameters: Ø5 / Ø6 / Ø8 / Ø10 / Ø12 mm (0.20 / 0.24 / 0.31 / 0.39 / 0.47″) /Ø12 mm (0.47″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€275,00
-
Набор Ayder - 10 предметов специального изогнутого набора
Набор Ayder - 10 предметов специального изогнутого набора Эти изогнутые палочки изготовлены из пружинной стали. Измерения следующие: Все палочки в наборе имеют диаметр 5 мм / 6 мм / 8 мм. Длина 20см/30см/40см/45см/60см Гарантия 1 год.
€425,00
-
Комплект из 3-х регулируемых стержней для ручек
Комплект из 3-х регулируемых стержней для ручек Эти регулируемые стержни ручек сделаны из пружинной стали. Они не ломаются. Длина стержней составляет 90-60-40 см соответственно. Диаметр у всех стержней 8 мм. Гарантия 1 год.
€250,00
-
Набор Zeugma - набор из 3 предметов Special Curve
Набор Zeugma - набор из 3 предметов Special Curve Эти изогнутые стержни изготовлены из пружинной стали. Небьющийся материал. Измерения следующие: Длина: 35/50/60 см. Диаметры: 6/8/8 мм Гарантия 1 год.
€200,00
-
Комплект из 3-х регулируемых стержней для ручек
Комплект из 3-х регулируемых стержней для ручек Эти регулируемые стержни ручек сделаны из пружинной стали. Они не ломаются. Длина стержней составляет 90-60-40 см соответственно. Диаметр у всех стержней 8 мм. Гарантия 1 год.
€200,00
-
Минимальный набор крючков - 3 шт.
Минимальный набор крючков - 3 шт. Эти палочки сделаны из пружинной стали. Небьющийся материал. Измерения следующие: 1.Палка 20 см / 5 мм 2.Палка 25 см / 6 мм 3.Палка 25 см / 8 мм Гарантия 1 год.
€140,00
-
Florya Set - набор из 4 пружинных стальных стержней
Florya Set - набор из 4 пружинных стальных стержней Эти стержни изготовлены из пружинной стали. Небьющийся материал. Измерения следующие: Диаметры 5мм-6мм Длина 20см-25см Гарантия 1 год.
€150,00
-
Набор из 2 предметов Картепе
Комплект изготовлен из пружинной стали. Меры следующие: длина 77 см и диаметр 10 мм.
€220,00
-
€50,00
-
€20,00
-
€140,00
-
€45,00
-
€45,00
-
€15,00
-
€35,00
-
€15,00
-
1-Piece Whale Tail PDR Tool - 60 cm / 5 cm (Tip Size)
Maximum reach for the deepest repair points. This 60 cm (23.6″) Whale Tail Rod features a 5 cm (2″) flat blade, giving you the reach needed to access dents deep inside doors, quarter panels and other hard-to-reach areas while applying smooth, evenly distributed pressure. Best for: long-reach repairs behind braces, inside double panels and across large dented areas where maximum leverage and a wide contact surface are required. 5 cm (2″) flat whale tail tip distributes force evenly for smooth, controlled dent correction 60 cm (23.6″) length provides maximum reach for deep panel access Premium spring steel retains its shape and strength under heavy leverage Available individually or as part of a complete Whale Tail Set In the box: 1 × 60 cm (23.6″) Whale Tail Rod with a 5 cm (2″) flat tip. Manufactured in our own facility. Backed by a 1-year warranty, 30-day free exchange, and worldwide express shipping with FedEx, UPS & DHL.
€45,00
-
1-Piece Whale Tail PDR Tool - 40 cm / 5 cm (Tip Size)
Extended reach for deeper repair areas. This 40 cm (15.7″) Whale Tail Rod features a 5 cm (2″) flat blade, allowing you to access dents deep inside doors, quarter panels and reinforced areas while maintaining smooth, even pressure across the repair surface. Best for: deeper panel access, working behind braces and repairing larger dents where extra reach and a wide contact area are essential. 5 cm (2″) flat whale tail tip spreads pushing force for smooth, controlled dent correction 40 cm (15.7″) length provides extended reach into deeper repair areas Premium spring steel maintains blade geometry and strength under leverage Available individually or as part of a complete Whale Tail Set In the box: 1 × 40 cm (15.7″) Whale Tail Rod with a 5 cm (2″) flat tip. Manufactured in our own facility. Backed by a 1-year warranty, 30-day free exchange, and worldwide express shipping with FedEx, UPS & DHL.
€45,00
-
1-Piece Whale Tail PDR Tool - 10 cm / 5 cm (Tip Size)
Built for maximum surface contact in the tightest repair areas. This 10 cm (3.9″) Whale Tail Rod features a 5 cm (2″) flat blade, making it ideal for pushing larger dents through narrow access points while distributing force evenly across the repair area. Best for: working behind braces, inside double panels and confined spaces where a wide contact surface provides smoother, more controlled pushes. 5 cm (2″) flat whale tail tip spreads force evenly for cleaner dent correction 10 cm (3.9″) length offers excellent control in tight, hard-to-reach areas High-quality spring steel maintains blade shape and durability under heavy leverage Available individually or as part of a complete Whale Tail Set In the box: 1 × 10 cm (3.9″) Whale Tail Rod with a 5 cm (2″) flat tip. Manufactured in our own facility. Backed by a 1-year warranty, 30-day free exchange, and worldwide express shipping with FedEx, UPS & DHL.
€45,00
-
PDR Tool Storage Case with Foam Interior 100x30 cm
PDR Tool Storage Case with Foam Interior Keep your Paintless Dent Repair tools protected, organized, and ready for every job with the PDR Tool Storage Case with Foam Interior. Built from durable, impact-resistant black plastic, this case is designed to withstand everyday workshop use and frequent transportation. The precision-cut foam insert securely holds your PDR tools in place, helping prevent movement, scratches, and unnecessary wear while carrying or storing your equipment. Its lightweight, wheel-free construction makes it easy to transport by hand, making it an excellent choice for technicians who prefer a compact and practical storage solution. Key Features Precision-cut foam interior keeps tools securely organized Durable impact-resistant black plastic construction Helps protect tools from scratches and transport damage Lightweight, wheel-free design for convenient carrying Compact 100 × 30 cm (39.4 × 11.8″) size, 2.5 kg weight, suitable for a wide range of PDR tools
€155,00
-
€65,00
You have seen 216 out of 240 products