SAVE100 Eligible Products
-
PDR Blending Hammer 3
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€23,90
-
PDR Blending Hammer 12
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€39,90
-
10-Piece Tool Set - Brace Tools - Sharp End – 15–60cm
A set of spring steel brace tools for paintless dent repair, built for working the tight gap between panel and brace.Best for: working the tight gap between panel and brace. spring steel construction – controlled flex, no kinking 15, 25, 35, 45, 60 cm (5.9, 9.8, 13.8, 17.7, 23.6″), Ø5, 6, 6, 6, 8 mm (0.20, 0.24, 0.24, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€149,90
-
Single Bend PDR Rod - 110 cm / 12 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
Single Bend PDR Rod 5/16 Thread Size (Interchangeable Tip)
A stainless steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. Stainless Steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
28-Piece Beginner PDR Tool Kit + 3-LED Mini Lamp
A complete PDR package assembled from our in-house manufactured tools.Best for: technicians who want a ready-to-work dent removal setup. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€489,90
-
PDR Simes Black Wax Silicone
The bond your pull depends on. Formulated for PDR glue pulling: strong grip on tabs and panel, clean release with alcohol, no residue on the paint.Best for: glue-pull repairs in all seasons – check listing for temperature grade. Strong tab-to-panel bond for confident pulls Releases cleanly with standard release agents Consistent melt behaviour in standard glue guns No residue, no paint damage Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€19,90
-
PDR Glass Holding Wedge
Repair the panel, protect the glass. Shields window edges and glass surfaces while rods work nearby.Best for: protecting glass and window slots during door and pillar repairs. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€14,90
-
Slap wooden for pen car body hail repair
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€14,90
-
PDR Precision Knockdown – Premium
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€12,00
-
Interchangeable Tip PDR Rod - 90 cm / 14 mm (M8 Double Thread)
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking 90 cm (35.4″), Ø12 mm (0.47″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
Клеевые язычки 50 шт.
Glue-pull tab for paintless dent removal without rear access. This 12351- 15x15mm (0.59x0.59″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 12351- 15x15mm (0.59x0.59″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Клеевые язычки 50 шт.
Glue-pull tab for paintless dent removal without rear access. This 12427- 20x40mm (0.79x1.57″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12427- 20x40mm (0.79x1.57″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Устройство для крепления капота PDR
(36-51 см) - 12457
€19,90
-
Набор из 2 предметов Картепе
Комплект изготовлен из пружинной стали. Меры следующие: длина 77 см и диаметр 10 мм.
€119,90
-
Минимальный набор крючков - 3 шт.
Минимальный набор крючков - 3 шт. Эти палочки сделаны из пружинной стали. Небьющийся материал. Измерения следующие: 1.Палка 20 см / 5 мм 2.Палка 25 см / 6 мм 3.Палка 25 см / 8 мм Гарантия 1 год.
€139,90
-
5-Piece Whale Tail PDR Tool Set – 5 cm (Tip Size)
The whale tail range that covers a full repair day. Four flat-blade rods from a 10 cm (3.9″) stub to a 60 cm (23.6″) reach tool, all with a 3 cm (1.2″) tip – wide enough to spread force across the dent, flat enough to slide between panel and brace. Best for: working between double panels, behind braces and along door skins where round rods slip. 5 cm (2″) tip spreads pushing force for smooth, controlled corrections 10 / 20 / 40 / 60 / 100 cm (3.9 / 7.9 / 15.7 / 23.6 / 39.3″) lengths – from tight cavity work to deep panel reach Spring steel blades hold their edge geometry under leverage Also available as single rods if you need one length only In the set: 4 whale tail rods: 10, 20, 40, 60 and 100 cm (3.9, 7.9, 15.7, 23.6, 39.3″), all with 5 cm (2″) tips. Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€169,90
-
Hanging Tool Set
Hang your rods where you work. This hanging bracket mounts to the vehicle and holds tools at hand height – no more bending to the floor between pushes.Best for: keeping rods, tails and finishing tools within reach at the repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€29,90
-
PDR Edge Dent Pulling Broken Kit
Pull the dent from the outside. This glue-pulling package combines the tabs, hardware and finishing tools needed to repair dents with no rear access – on aluminium panels, braced sections and modern boxed structures.Best for: panels where rod access is blocked or risky. Tab profiles for different dent shapes and sizes Pulling hardware for measured force No drilling, no paint damage Finishing tools included where listed Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€22,90
-
PDR T-Shaped Hanging Bracket
Hang your rods where you work. This hanging bracket mounts to the vehicle and holds tools at hand height – no more bending to the floor between pushes.Best for: keeping rods, tails and finishing tools within reach at the repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€29,90
-
PDR Metal Chain Hanger
Hang your rods where you work. This hanging bracket mounts to the vehicle and holds tools at hand height – no more bending to the floor between pushes.Best for: keeping rods, tails and finishing tools within reach at the repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€14,90
-
PDR Pro Slide Hammer
Controlled outward pulling force for glue-pull dent removal. Bond a tab, attach the slide hammer and deliver measured pulls until the dent releases – the standard method when there is no access behind the panel.Best for: glue-pull repairs on braced panels and aluminium skins. Weighted slide for repeatable pulling force Comfortable end grip for one-hand operation Pairs with our full glue tab range Threaded/quick-fit tab attachment Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€69,90
-
PDR Lite Slide Hammer
Controlled outward pulling force for glue-pull dent removal. Bond a tab, attach the slide hammer and deliver measured pulls until the dent releases – the standard method when there is no access behind the panel.Best for: glue-pull repairs on braced panels and aluminium skins. Weighted slide for repeatable pulling force Comfortable end grip for one-hand operation Pairs with our full glue tab range Threaded/quick-fit tab attachment Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€59,90
-
PDR Metal Knockdown (Red)
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€16,00
You have seen 120 out of 231 products