SAVE100 Eligible Products
-
PDR Knockdown – Ergonomic
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€16,00
-
25-Piece Starter PDR Rod Set
A complete PDR package assembled from our in-house manufactured tools.Best for: technicians who want a ready-to-work dent removal setup. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€299,90
-
€239,90
-
Наборы палочек PDR - 6 шт.
Все палки изготовлены из нержавеющей стали. Набор из 6 изогнутых инструментов диаметром 3/8 дюйма отлично подходит для капотов и крышек палуб. Эти инструменты чрезвычайно прочные и оснащены одной из самых эргономичных ручек в отрасли PDR. Длина инструментов составляет 12", 18" и 24".
€120,00 €99,90
-
Набор Ulubey - 6 шт. Специальные угловые палочки
Набор Ulubey - 6 шт. Специальные угловые палочки Эти палочки сделаны из пружинной стали. Небьющийся материал. Измерения следующие: Длина: 30/45/60 см. Диаметры: 6/8/10 мм Гарантия 1 год.
€99,90
-
2 шт. Регулируемая ручка-стержень, специальная кривая
2 шт. Регулируемая ручная штанга специального изгиба Эти регулируемые стержни ручек изготовлены из пружинной стали. Небьющийся материал. Размеры: длина: 65/45 см, диаметр: 10 мм. Гарантия 1 год.
€89,90
-
PDR Magnetic Pro Slide Hammer
Glue-pull power with a magnetic quick-change end. The Magnetic Pro slide hammer drives controlled outward pulls on glued tabs, and its magnetic coupling lets you swap tab adapters in seconds instead of threading under pressure. Best for: glue-pull repairs on braced panels, aluminium skins and anywhere rear access is blocked. Magnetic quick-change coupling – swap tabs and adapters in seconds Weighted slide delivers measured, repeatable pulling force Comfortable end grip for controlled single-hand operation Pairs with our full glue tab range 2 kg weight Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€69,90
-
10-Piece Brace Tool Set (L/R) (Round Tip)
A set of spring steel brace tools for paintless dent repair, built for working the tight gap between panel and brace.Best for: working the tight gap between panel and brace. spring steel construction – controlled flex, no kinking 15, 25, 35, 45, 60 cm (5.9, 9.8, 13.8, 17.7, 23.6″), Ø5, 6, 6, 6, 8 mm (0.20, 0.24, 0.24, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€139,90
-
3-Piece Whale Tail PDR Tool Set - 3 cm (Tip Size)
The essential whale tail trio. Short, medium and long – 20, 40 and 60 cm (7.9, 15.7 and 23.6″) blades with 3 cm (1.2″) tips cover the three most common access situations without the cost of a full range.Best for: technicians adding whale tails to an existing rod kit, or as a focused starter set. 20 / 40 / 60 cm (7.9 / 15.7 / 23.6″) – the three most-used whale tail lengths 3 cm (1.2″) flat tip spreads force for clean, gradual pushes Spring steel blades with comfort grips Upgrade path: 4, 7 and 15-piece sets share the same blade profile In the set: 3 whale tails: 20, 40 and 60 cm (7.9, 15.7 and 23.6″), 3 cm (1.2″) tips.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€69,90
-
7-Piece Side Panel PDR Hook Set (Round Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking 20, 20, 30, 45, 45, 60, 70 cm (7.9, 7.9, 11.8, 17.7, 17.7, 23.6, 27.6″), Ø5, 6, 8 mm (0.20, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€129,90
-
Interchangeable Tip PDR Rod - 120 cm / 14 mm (M8 Double Thread)
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod. Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking 120 cm (47.2″), Ø14 mm (0.55″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€64,90
-
6-Piece Single Bend PDR Rod Set (Sharp Tip)
A curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Spring Steel construction – controlled flex, no kinking Curved profile for the intended access geometry Comfort grip for extended sessions Measurements: Lengths: 30 / 45 / 60 / 75 / 90 / 110 cm (11.8 / 17.7 / 23.6 / 29.5 / 35.4 / 43.3″) — Diameters: Ø5 / Ø6 / Ø8 / Ø10 / Ø12 mm (0.20 / 0.24 / 0.31 / 0.39 / 0.47″) /Ø12 mm (0.47″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€169,90
-
4 шт. регулируемой ручки
4 шт. регулируемой ручки Эти регулируемые стержни ручек изготовлены из пружинной стали. Небьющийся материал. Длина стержней составляет 45-50-60-70 см соответственно. Диаметр у всех стержней 8 мм. Гарантия 1 год.
€109,90
-
Набор Efes из 10 предметов
20-30-45-60-70 см Слева - Справа 20-30-45 см / диаметр 6 мм 60-70 см / диаметр 8 мм Для автомобилей с алюминиевым кузовом
€199,90
-
PDR Flexible Hanging Tool
Hang your rods where you work. This hanging bracket mounts to the vehicle and holds tools at hand height – no more bending to the floor between pushes.Best for: keeping rods, tails and finishing tools within reach at the repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€9,90
-
Набор Çeşme - набор из 6 удилищ со специальной ручкой
Набор Çeşme - набор из 6 удилищ со специальной ручкой Эти специальные палочки сделаны из пружинной стали. Небьющийся материал. Меры следующие: 1. Палочка: 5 мм - 25 см 2. Палочка: 6 мм - 35 см 3. Палка: 8 мм - 45 см 4. Палка: 8 мм - 60 см 5. Палка: 10 мм - 70 см 6. Палка: 12 мм - 90 см Гарантия 1 год.
€169,90
-
PDR Lamp for Car Body Repair 6 LED warm and cold
You can only fix the dent you can see. This PDR light strips the panel of guesswork, throwing line-board reflections that reveal every high spot, crown and low – before, during and after the push.Best for: reading dents accurately on any panel, in shop or mobile use. High-CRI LED output for true panel reading Adjustable positioning to sweep reflections across the dent Suitable for shop and mobile setups Pairs with our PDR stands Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€169,90
-
PDR Changable Tips Hammer Set and 13 Pcs Tips Set
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€79,90
-
2 шт. Регулируемая ручка-стержень черного и желтого цвета
2 шт. регулируемая ручная штанга черного и желтого цвета Эта регулируемая ручка-стержень изготовлена из пружинной стали. Небьющийся материал. Размеры: длина 90 см, диаметр 8 мм. Гарантия 1 год.
€109,90
-
Mini Whale Tail PDR Tool - 3.8 cm / 30 mm (Tip Size)
A spring steel whale tail rod for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions Measurements: Length: 3.8 cm (1.5″) — Tip width: 3.0 cm (1.2″)Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€29,90
-
PDR 360° Rotating Lifter
Pull the dent from the outside. This glue-pulling package combines the tabs, hardware and finishing tools needed to repair dents with no rear access – on aluminium panels, braced sections and modern boxed structures.Best for: panels where rod access is blocked or risky. Tab profiles for different dent shapes and sizes Pulling hardware for measured force No drilling, no paint damage Finishing tools included where listed Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
-
Gülhane Set - набор из 7 пружинных стальных стержней
Gülhane Set - набор из 7 пружинных стальных стержней Эти стержни изготовлены из пружинной стали. Небьющийся материал. Измерения следующие: Диаметры: 6 мм - 5 мм - 5 мм Длина: 30см-45см-60см-90см-120см Гарантия 1 год.
€139,90
-
Emirgan Set - набор из 3 пружинных стальных стержней
Emirgan Set - набор из 3 пружинных стальных стержней Эти стержни изготовлены из пружинной стали. Небьющийся материал. Измерения следующие: Диаметры: 5 мм-6 мм Длина: 45 см-60 см-90 см Гарантия 1 год.
€89,90
-
PDR Pulling Bead Set With Bag
Pull the dent from the outside. This glue-pulling package combines the tabs, hardware and finishing tools needed to repair dents with no rear access – on aluminium panels, braced sections and modern boxed structures.Best for: panels where rod access is blocked or risky. Tab profiles for different dent shapes and sizes Pulling hardware for measured force No drilling, no paint damage Finishing tools included where listed Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
You have seen 48 out of 231 products