Curved & Bent Rods
-
10-Piece Single Bend Curved PDR Rod Set (Sharp Tip) - 20–60cm
Reach the dents straight rods can't. This 10-piece curved PDR rod set is shaped for tight, awkward access points – behind door braces, inside quarter panels and under hood edges – where a straight rod loses leverage before it reaches the dent. Best for: door panels, fenders, quarter panels and complex hail damage on curved body lines. Spring steel construction – flexes under load and snaps back without kinking Progressive curve profiles – shallow sweeps for panel work, deep bends for boxed sections Five lengths, three diameters – thin short rods for precision, thick long rods for leverage Comfort-grip handles on every rod In the set: 10 curved rods covering 20–30-40-45-60 cm (7.9–11.8-15.7-17.7-23.6″) in Ø5, Ø6 and Ø8 mm (0.20, 0.24 and 0.31″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$250.00
-
4-Piece Single Bend Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Spring Steel construction – controlled flex, no kinking 20, 25 cm (7.9, 9.8″), Ø5, 6 mm (0.20, 0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$100.00
-
6-Piece Double Bend Curved PDR Rod Set (Round Tip)
Two bends put the tip where one can't. The double bend geometry of this 6-piece curved rod set lets the shaft clear a brace or inner panel edge and still land the tip flat on the dent – the go-to profile for obstructed repairs.Best for: dents hiding behind braces, reinforcements and inner panel structures. Double bend profile clears obstructions while keeping tip control 25 / 40 / 55 cm (9.8 / 15.7 / 21.7″) lengths for shallow and deep obstructed sections Ø8 mm (0.31″) spring steel – stiffness for real corrective force Comfort grips for high-leverage work In the set: 6 double bend curved rods: 25, 40 and 55 cm (9.8, 15.7 and 21.7″), Ø8 mm (0.31″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$160.00
-
6-Piece Single Bend Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 15, 25, 35 cm (5.9, 9.8, 13.8″), Ø5 mm (0.20″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$135.00
-
6-Piece Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 60 cm (11.8, 17.7, 23.6″), Ø5, 6, 8 mm (0.20, 0.24, 0.31″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$200.00
-
6-Piece Double Bend Brace Tool Set (L/R) (Round Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 65 cm (11.8, 17.7, 25.6″), Ø6, 6, 8 mm (0.24, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$140.00
-
6-Piece Single Bend PDR Rod Set (Sharp Tip)
A curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Spring Steel construction – controlled flex, no kinking Curved profile for the intended access geometry Comfort grip for extended sessions Measurements: Lengths: 30 / 45 / 60 / 75 / 90 / 110 cm (11.8 / 17.7 / 23.6 / 29.5 / 35.4 / 43.3″) — Diameters: Ø5 / Ø6 / Ø8 / Ø10 / Ø12 mm (0.20 / 0.24 / 0.31 / 0.39 / 0.47″) /Ø12 mm (0.47″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$235.00
-
10-Piece Single Bend Curved PDR Rod Set (Sharp Tip) - 20–70cm
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. Spring Steel construction – controlled flex, no kinking 20, 30, 45, 60, 70 cm (7.9, 11.8, 17.7, 23.6, 27.6″), Ø5, 6, 8 mm (0.20, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$275.00
-
2-Piece Single Bend Curved PDR Rod Set - 45 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 45 cm (17.7″), Ø6 mm (0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$90.00
-
Double Bend Angled PDR Rod - 60 cm / 8 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm (23.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$75.00
-
Double Bend PDR Rod - 55 cm / 10 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm (21.7″), Ø10 mm (0.39″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$75.00
-
2-Piece Double Bend PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 40 cm (15.7″), Ø5 mm (0.20″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$100.00
-
2-Piece Single Bend Curved PDR Rod Set - 35 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 35 cm (13.8″), Ø6 mm (0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$90.00
-
2-Piece Single Bend Curved PDR Rod Set - 55 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm (21.7″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$90.00
-
2-Piece Curved PDR Rod Set – 30cm, Ø5mm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30 cm (11.8″), Ø5 mm (0.20″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Black handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$90.00
-
Double Bend PDR Rod - 90 cm / 12 mm (Sharp Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$80.00
-
2-Piece Double Bend Curved PDR Rod Set (Round Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 45 cm (17.7″), Ø6 mm (0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Green handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$90.00
-
Single Bend PDR Rod - 110 cm / 12 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$80.00
-
Special Bend PDR Rod - 90 cm / 12 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$80.00
-
5-Piece Single Bend PDR Rod Set (Sharp Tip - Pointy Tip)
A set of stainless steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions 3 Pointy Tip 60/70/80 cm (23.6/27.6/31.5″) (Ø10 mm (0.39″)) + 2 Sharp Tip 65/85 cm (25.6/33.5″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$245.00
-
Single Bend Cross Handle PDR Rod - 60 cm / 8 mm (Sharp Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm (23.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Blue handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$75.00
-
2-Piece Single Bend PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions 65 / 85 cm (25.6 / 33.5″), Ø10 mm (0.39″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$155.00
