Products
-
3-Piece Single Bend T-Handle PDR Rod Set (Rounded Ball Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking 50, 60, 70 cm (19.7, 23.6, 27.6″), Ø8, 10, 12 mm (0.31, 0.39, 0.47″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$81.00
-
3-Piece Stainless Steel 360° Adjustable Handle Double Bend PDR Rod Set
Rotate the handle, not your body. These three curved rods carry 360° adjustable handles that lock at any angle, so in cramped working positions you set the grip to suit your stance and keep full control of the tip. Best for: awkward working positions – kneeling at sills, reaching over engine bays, working under-panel. 360° locking handles – any grip angle, locked solid Curved shafts for access around edges and braces 35 / 50 / 60 cm (13.8 / 19.7 / 23.6″) lengths, Ø6–8 mm (0.24–0.31″) stainless steel Reduces wrist fatigue on long repair sessions In the set: 3 curved rods with 360° adjustable handles: 35, 50 and 60 cm (13.8, 19.7 and 23.6″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$170.00
-
3-Piece Stainless Steel Adjustable Handle Rod Set (Round Tip)
A set of stainless steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist. Best for: awkward angles – set the handle to the panel instead of fighting your wrist. stainless steel construction – controlled flex, no kinking 40, 60, 90 cm (15.7, 23.6, 35.4″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$170.00
-
3-Piece Stainless Steel Mini Hook PDR Tool Set (Sharp Tip)
A stainless steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections. Best for: pull-direction corrections inside doors and boxed sections. stainless steel construction – controlled flex, no kinking 20, 20, 25 cm (7.9, 7.9, 9.8″), Ø5, 6, 5 mm (0.20, 0.24, 0.20″) – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$129.00
-
3-Piece Whale Tail PDR Tool Set - 3 cm (Tip Size)
The essential whale tail trio. Short, medium and long – 20, 40 and 60 cm (7.9, 15.7 and 23.6″) blades with 3 cm (1.2″) tips cover the three most common access situations without the cost of a full range.Best for: technicians adding whale tails to an existing rod kit, or as a focused starter set. 20 / 40 / 60 cm (7.9 / 15.7 / 23.6″) – the three most-used whale tail lengths 3 cm (1.2″) flat tip spreads force for clean, gradual pushes Spring steel blades with comfort grips Upgrade path: 4, 7 and 15-piece sets share the same blade profile In the set: 3 whale tails: 20, 40 and 60 cm (7.9, 15.7 and 23.6″), 3 cm (1.2″) tips.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$69.00
-
4-Piece Adjustable Handle PDR Rod Set (Round Tip) 25/60 cm
Fits through a door drain hole – customers have proven it. These four adjustable-handle rods (25–50 cm (9.8–19.7″), Ø6 mm (0.24″)) are slim enough to enter through factory openings and the locking handle sets your grip angle so the tip lands square on the dent.Best for: door skins accessed through drain holes and window slots – no trim removal needed. Adjustable locking handle – set the working angle, not your wrist Slim Ø6 mm (0.24″) shafts pass through factory drain holes 25 / 30 / 40 / 50 cm (9.8 / 11.8 / 15.7 / 19.7″) lengths for every door size Spring steel with controlled flex for precise pushes In the set: 4 adjustable-handle rods: 25, 30, 40 and 50 cm (9.8, 11.8, 15.7 and 19.7″), Ø6 mm (0.24″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$115.00
-
4-Piece Adjustable Handle Rod Set (Round Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 45, 50, 60, 70 cm (17.7, 19.7, 23.6, 27.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$127.00
-
4-Piece Adjustable Handle Whale Tail PDR Tool Set - 3cm (Tip Size)
A set of spring steel whale tail rods for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking 10, 20, 40, 60 cm (3.9, 7.9, 15.7, 23.6″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$127.00
-
4-Piece Single Bend Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Spring Steel construction – controlled flex, no kinking 20, 25 cm (7.9, 9.8″), Ø5, 6 mm (0.20, 0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$75.00
-
4-Piece Stainless Steel Adjustable Handle Rod Set (Sharp Tip)
A set of stainless steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist. Best for: awkward angles – set the handle to the panel instead of fighting your wrist. stainless steel construction – controlled flex, no kinking 30-40-50-60 cm (12", 16", 20″, 24"), Ø10 mm (0.4″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$235.00
-
4-Piece Stainless Steel Single Bend PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking 20, 25 cm (7.9, 9.8″), Ø5, 6 mm (0.20, 0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$129.00
-
4-Piece Whale Tail PDR Tool Set – 3 cm (Tip Size)
The whale tail range that covers a full repair day. Four flat-blade rods from a 10 cm (3.9″) stub to a 60 cm (23.6″) reach tool, all with a 3 cm (1.2″) tip – wide enough to spread force across the dent, flat enough to slide between panel and brace.Best for: working between double panels, behind braces and along door skins where round rods slip. 3 cm (1.2″) flat tip spreads pushing force for smooth, controlled corrections 10 / 20 / 40 / 60 cm (3.9 / 7.9 / 15.7 / 23.6″) lengths – from tight cavity work to deep panel reach Spring steel blades hold their edge geometry under leverage Also available as single rods if you need one length only In the set: 4 whale tail rods: 10, 20, 40 and 60 cm (3.9, 7.9, 15.7 and 23.6″), all with 3 cm (1.2″) tips.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$87.00
-
40-Piece Complete Starter PDR Tool Kit
Start with light, sight and steel. The 40-piece complete starter kit is the only beginner package in our range that includes a professional 6-LED PDR lamp and stand – because you can only fix the dent you can see – alongside a full spread of rods, whale tails and angle tools.Best for: starting a PDR business from zero: repair, lighting and finishing in one purchase. PDR stand + 6-LED professional lamp (3 yellow / 3 white) for accurate dent reading 7-piece whale tail set (10–110 cm (3.9–43.3″), 3 cm (1.2″) tip) for brace and panel work 7-piece rod set (20–70 cm (7.9–27.6″), Ø5–8 mm (0.20–0.31″)) plus angled and adjustable-handle rods Finishing tools included to blend repairs invisibly In the set: 40 pieces: lamp + stand, 7 whale tails, 7 rods, angled rod set, adjustable-handle curved rods and finishing tools.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$1,375.00
-
40cm Adjustable Sanding Block – Auto Paint
DENT MASTER Auto Paint 40 cm (15.7″) Adjustable Automatic Planing Sanding Block
$92.00
-
5-Piece 360° Adjustable Handle PDR Rod Set – 8 mm / 5/16” (Round Tip)
Professional PDR Tools 5-Piece 360° Adjustable Handle PDR Rod Set Built for professional paintless dent repair. Five spring-steel PDR rods combine multiple lengths, 55° and 90° working angles and fully adjustable handles for precise access and controlled pushing. 5 PCS Complete Set 360° Adjustable Handle Ø8 mm 5/16" Rod Diameter 55° / 90° Working Angles Built for Control Designed around the technician. Different shaft lengths and working angles allow the set to adapt to multiple access points while maintaining controlled leverage during dent repair. 01 360° Adjustable Handle Rotate and position the handle through 360 degrees to find the most comfortable leverage position for each access point. 02 Spring Steel Construction Manufactured from durable spring steel to provide the rigidity, controlled flex and resistance required for professional PDR applications. 03 Ø8 mm / 5/16" Rods The 8 mm rod diameter provides a strong balance between pushing power and accessibility behind vehicle body panels. 04 Multiple Working Angles A combination of 55° and 90° working ends provides different pushing positions for restricted and difficult-to-access repair areas. 360° One handle. Any working position. The adjustable handle allows the technician to change the hand position without changing the working angle of the rod, improving comfort and control when working around different vehicle panels. Technical Specifications Five rods. Three reach lengths. Two working angles. Rod Main Shaft Working End Angle Diameter Rod 01 190 mm / 7.48" 110 mm / 4.33" 55° Ø8 mm / 5/16" Rod 02 190 mm / 7.48" 110 mm / 4.33" 90° Ø8 mm / 5/16" Rod 03 340 mm / 13.39" 110 mm / 4.33" 90° Ø8 mm / 5/16" Rod 04 490 mm / 19.29" 130 mm / 5.12" 55° Ø8 mm / 5/16" Rod 05 490 mm / 19.29" 130 mm / 5.12" 90° Ø8 mm / 5/16" Main shaft measurements are taken from the handle connection to the bend area. Working-end measurements refer to the section after the bend. Professional Applications Access where you need it. ✓ Door Panels ✓ Roof Panels ✓ Quarter Panels ✓ Fenders ✓ Hood & Trunk ✓ Restricted Access Areas Inside The Set 5 Professional PDR Rods Ready for professional dent repair. ✓ Spring steel construction ✓ 360° adjustable handles ✓ Ø8 mm / 5/16" rod diameter ✓ 55° & 90° working angles ✓ Short, medium and long reach configurations
$221.00
-
5-Piece Single Bend / Double Bend PDR Rod Set (Round Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors. Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking Measurements: 75cm (29.5″) & 55cm (21.7″) & 35cm (13.8″) single bend, 65cm (25.6″) & 45cm (17.7″) double bend — all Ø8 mm (0.31″) Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$115.00
-
5-Piece Single Bend PDR Rod Set (Sharp Tip - Pointy Tip)
A set of stainless steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions 3 Pointy Tip 60/70/80 cm (23.6/27.6/31.5″) (Ø10 mm (0.39″)) + 2 Sharp Tip 65/85 cm (25.6/33.5″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$208.00
-
5-Piece Whale Tail PDR Tool Set – 5 cm (Tip Size)
The whale tail range that covers a full repair day. Four flat-blade rods from a 10 cm (3.9″) stub to a 60 cm (23.6″) reach tool, all with a 3 cm (1.2″) tip – wide enough to spread force across the dent, flat enough to slide between panel and brace. Best for: working between double panels, behind braces and along door skins where round rods slip. 5 cm (2″) tip spreads pushing force for smooth, controlled corrections 10 / 20 / 40 / 60 / 100 cm (3.9 / 7.9 / 15.7 / 23.6 / 39.3″) lengths – from tight cavity work to deep panel reach Spring steel blades hold their edge geometry under leverage Also available as single rods if you need one length only In the set: 4 whale tail rods: 10, 20, 40, 60 and 100 cm (3.9, 7.9, 15.7, 23.6, 39.3″), all with 5 cm (2″) tips. Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$190.00
-
55-Piece Professional PDR Tool Kit
Professional PDR Tool System 55-Piece Professional PDR Tool Kit A comprehensive professional PDR rod collection built for technicians who need multiple lengths, bends and access profiles in one complete working set. Designed for everyday dent repair, hail work and demanding workshop applications. Spring Steel Professional-grade construction with controlled working flex. 55-Piece System A broad selection of rods and profiles for professional PDR work. Multiple Profiles T-handles, curved rods, whale tails, hooks, L-handles and more. Wide Length Range Compact access tools through to long professional pushing rods. Built for Everyday PDR One Set. Multiple Access Points. Professional dent repair rarely requires just one rod profile. Different panels, braces and access points require different lengths, leverage and working angles. This set combines a wide selection of professional rod configurations so technicians can move between different repair situations without constantly changing tool sets. ✓ Long rods for deeper panel access and increased leverage ✓ Compact rods for restricted and tighter working areas ✓ Left and right configurations for different access directions ✓ Whale tails for brace and reinforcement access ✓ Multiple handle styles for leverage and working control ✓ Designed for doors, roofs, hoods, quarter panels and hail repair Complete Tool Breakdown Tool Sizes & Specifications The set combines multiple tool families and working lengths to provide professional technicians with a broad range of access and leverage options. Tool Type Metric Sizes Approx. Imperial Lengths Qty. Movable Sticks 72 · 65 · 41 · 28 cm 28.35 · 25.59 · 16.14 · 11.02 in 4 Middle Curl – Right 67 · 52 · 42 · 32 · 23 cm 26.38 · 20.47 · 16.54 · 12.60 · 9.06 in 5 Middle Curl – Left 67 · 52 · 42 · 32 · 23 cm 26.38 · 20.47 · 16.54 · 12.60 · 9.06 in 5 T-Handle Rods 90 cm × 12 mm · 120 cm × 12 mm · 120 cm × 14 mm · 110 cm × 12 mm · 110 cm × 12 mm · 80 cm × 10 mm · 60 cm × 10 mm · 60 cm × 10 mm · 65 cm × 10 mm · 60 cm × 8 mm · 60 cm × 8 mm 35.43" × 0.47" · 47.24" × 0.47" · 47.24" × 0.55" · 43.31" × 0.47" · 43.31" × 0.47" · 31.50" × 0.39" · 23.62" × 0.39" · 23.62" × 0.39" · 25.59" × 0.39" · 23.62" × 0.31" · 23.62" × 0.31" 11 Curved Handle Rods 73 · 76 · 56 · 54 · 63 · 64 cm 28.74 · 29.92 · 22.05 · 21.26 · 24.80 · 25.20 in 6 Burgundy Handle Rods 60 · 44 cm 23.62 · 17.32 in 2 Flat Rods 27 · 20 cm 10.63 · 7.87 in 2 Whale Tails 83 · 62 · 43 · 24 cm 32.68 · 24.41 · 16.93 · 9.45 in 4 2-Curl & L-Handle Rods 34 · 31 cm 13.39 · 12.20 in 2 Hook Tip Rods 40 cm 15.75 in 3 Small L-Handle – Left 52.5 · 42.5 · 32.5 · 22.5 cm 20.67 · 16.73 · 12.80 · 8.86 in 4 Small L-Handle – Right 52.5 · 42.5 · 32.5 · 22.5 cm 20.67 · 16.73 · 12.80 · 8.86 in 4 Moon Sticks 36 · 29 cm 14.17 · 11.42 in 2 Professional Construction Spring Steel for Controlled Pushing Manufactured from spring steel for the balance of strength, controlled flex and working feedback required in professional PDR. The different rod lengths and profiles allow technicians to select the appropriate leverage and access angle for each repair. Made for Professionals One Comprehensive PDR Rod System. Multiple lengths. Multiple profiles. Professional access and control.
$900.00
-
6-Piece Curved Hook PDR Rod Set (Sharp Tip)
Hooks that pull the dent toward you. This 6-piece hook PDR rod set puts a curved working tip on compact spring steel shafts, letting you apply force back toward yourself in cavities where a forward push is impossible.Best for: door internals, pillar sections and boxed panels where the dent sits behind the access point. Hook-profile tips for pull-direction corrections Compact 30 / 40 / 45 cm (11.8 / 15.7 / 17.7″) shafts steer easily inside cavities Three diameters (Ø5 / 6 / 8 mm (0.20 / 0.24 / 0.31″)) – match stiffness to panel gauge Spring steel: controlled flex, no kinking In the set: 6 hook rods: 30, 40 and 45 cm (11.8, 15.7 and 17.7″) in Ø5, Ø6 and Ø8 mm (0.20, 0.24 and 0.31″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$162.00
-
6-Piece Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 60 cm (11.8, 17.7, 23.6″), Ø5, 6, 8 mm (0.20, 0.24, 0.31″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$162.00
-
6-Piece Curved Whale Tail PDR Tool Set - 3 cm (Tip Size)
A set of spring steel whale tail rods for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking 10, 20, 30, 40, 50, 60 cm (3.9, 7.9, 11.8, 15.7, 19.7, 23.6″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$175.00
-
6-Piece Double Bend - Cross Handle PDR Rod Set (Pointy Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking 25, 35, 45, 60, 70, 90 cm (9.8, 13.8, 17.7, 23.6, 27.6, 35.4″), Ø5, 6, 8, 8, 10, 12 mm (0.20, 0.24, 0.31, 0.31, 0.39, 0.47″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$185.00
-
6-Piece Double Bend Brace Tool Set (L/R) (Round Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 65 cm (11.8, 17.7, 25.6″), Ø6, 6, 8 mm (0.24, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
$115.00
You have seen 72 out of 246 products