Products
-
Aluminium Knockdown Changeable Tip
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€20,00
-
Blending Hammer - PDR
- 170 gr (weight)
€50,00
-
Compact Whale Tail PDR Rod – Reinforced - 10 cm
A spring steel whale tail rod for paintless dent repair, built for brace work and double panels where round rods slip. Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions 10 cm (3.9″) / 2 cm (0.8″) tip size Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€25,00
-
Double Bend Angled PDR Rod - 60 cm / 8 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm (23.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€44,90
-
Double Bend PDR Rod - 55 cm / 10 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm (21.7″), Ø10 mm (0.39″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€44,90
-
Double Bend PDR Rod - 90 cm / 12 mm (Sharp Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
Double Bend PDR Rod 5/16 Thread Size (Interchangeable Tip)
A stainless steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. Stainless Steel construction – controlled flex, no kinking Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
Double Bend T-Handle PDR Rod - 80 cm / 10 mm (Sharp Tip)
A spring steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. spring steel construction – controlled flex, no kinking 80 cm (31.5″), Ø10 mm (0.39″) – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
-
Fender Correction Tool for Car Body Repair
Purpose-built for fender access and edge work.Best for: fender lips, arches and edge repairs. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€20,00
-
€65,00
-
Glue tabs for pdr dent - 10259- 35x17mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10259- 35x17mm (1.38x0.67″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 10259- 35x17mm (1.38x0.67″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 10260- 25x12mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10260- 25x12mm (0.98x0.47″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 10260- 25x12mm (0.98x0.47″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 10268 - 12,5x33,7mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10268 - 12,5x33,7mm (0.49x1.33″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 10268 - 12,5x33,7mm (0.49x1.33″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 10757 - 5*43mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10757 - 5*43mm (1.69″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 10757 - 5*43mm (1.69″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 11328-1- 50*28mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11328-1- 50*28mm (1.10″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 11328-1- 50*28mm (1.10″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€7,00
-
Glue tabs for pdr dent - 11332 - 26,5mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11332 - 26,5mm (1.04″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11332 - 26,5mm (1.04″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 11333-1- 21,5mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11333-1- 21,5mm (0.04- 0.85″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11333-1- 21,5mm (0.04- 0.85″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 11337- 16,1mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11337- 16,1mm (0.63″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11337- 16,1mm (0.63″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 12006 - 12*25mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12006 - 12*25mm (0.98″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 12006 - 12*25mm (0.98″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 12020- 50*27mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12020- 50*27mm (1.06″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12020- 50*27mm (1.06″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€7,00
-
Glue tabs for pdr dent - 12077 - 75-50 mm Red - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12077 - 75-50 mm (2.95-1.97″) red tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12077 - 75-50 mm (2.95-1.97″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€5,00
-
Glue tabs for pdr dent - 12177- 14x40mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12177- 14x40mm (0.55x1.57″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12177- 14x40mm (0.55x1.57″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 12349 - 40*40 mm Green - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12349 - 40*40 mm (1.57″) green tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12349 - 40*40 mm (1.57″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 12351- 15x15mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12351- 15x15mm (0.59x0.59″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 12351- 15x15mm (0.59x0.59″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
You have seen 120 out of 246 products