Products
-
Adjustable Handle 360 Degree - 60cm/8mm
A spring steel adjustable-handle rod for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 60 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
-
Adjustable Handle 360 Degree - 65cm/10mm
A spring steel adjustable-handle rod for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 65 cm, Ø10 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
-
Adjustable Handle 360 Degree 30cm/8mm
A spring steel adjustable-handle rod for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 30 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
-
Adjustable Handle Rod T-Handle – 50cm / 8mm
A spring steel adjustable-handle rod for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 50 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
-
Adjustable Hanging Tool
Hang your rods where you work. This hanging bracket mounts to the vehicle and holds tools at hand height – no more bending to the floor between pushes.Best for: keeping rods, tails and finishing tools within reach at the repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€15,00
-
Aluminium Knockdown Changeable Tip
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€20,00
-
Blending Hammer - PDR
- 170 gr (weight)
€49,90
-
Compact Whale Tail PDR Rod – Reinforced - 10 cm
A spring steel whale tail rod for paintless dent repair, built for brace work and double panels where round rods slip. Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions 10 cm / 2 cm tip size Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€25,00
-
Double Bend Angled PDR Rod - 60 cm / 8 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm, Ø8 mm – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€44,90
-
Double Bend Hook PDR Rod – 70cm / 12mm (Pointy Tip)
A spring steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. Spring Steel construction – controlled flex, no kinking 70 cm, Ø12 mm – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
Double Bend PDR Rod - 55 cm / 10 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm, Ø10 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€44,90
-
Double Bend PDR Rod - 90 cm / 12 mm (Sharp Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
Double Bend PDR Rod 5/16 Thread Size (Interchangeable Tip)
A stainless steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. Stainless Steel construction – controlled flex, no kinking Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€50,00
-
Double Bend T-Handle PDR Rod - 80 cm / 10 mm (Sharp Tip)
A spring steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. spring steel construction – controlled flex, no kinking 80 cm, Ø10 mm – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€49,90
-
Fender Correction Tool for Car Body Repair
Purpose-built for fender access and edge work.Best for: fender lips, arches and edge repairs. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€20,00
-
€50,00
-
Glue tabs for pdr dent - 10259- 35x17mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10259- 35x17mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 10259- 35x17mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 10260- 25x12mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10260- 25x12mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 10260- 25x12mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 10268 - 12,5x33,7mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10268 - 12,5x33,7mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 10268 - 12,5x33,7mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 10757 - 5*43mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10757 - 5*43mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 10757 - 5*43mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 11328-1- 50*28mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11328-1- 50*28mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 11328-1- 50*28mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€7,00
-
Glue tabs for pdr dent - 11332 - 26,5mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11332 - 26,5mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11332 - 26,5mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,50
-
Glue tabs for pdr dent - 11333-1- 21,5mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11333-1- 21,5mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11333-1- 21,5mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
-
Glue tabs for pdr dent - 11337- 16,1mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11337- 16,1mm tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11337- 16,1mm pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€6,00
You have seen 96 out of 214 products