SAVE100 Eligible Products
-
4-Piece Stainless Steel Adjustable Handle Rod Set (Sharp Tip)
A set of stainless steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist. Best for: awkward angles – set the handle to the panel instead of fighting your wrist. stainless steel construction – controlled flex, no kinking 30-40-50-60 cm (12", 16", 20″, 24"), Ø10 mm (0.4″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£210.00
-
3-Piece Stainless Steel 360° Adjustable Handle Double Bend PDR Rod Set
Rotate the handle, not your body. These three curved rods carry 360° adjustable handles that lock at any angle, so in cramped working positions you set the grip to suit your stance and keep full control of the tip. Best for: awkward working positions – kneeling at sills, reaching over engine bays, working under-panel. 360° locking handles – any grip angle, locked solid Curved shafts for access around edges and braces 35 / 50 / 60 cm (13.8 / 19.7 / 23.6″) lengths, Ø6–8 mm (0.24–0.31″) stainless steel Reduces wrist fatigue on long repair sessions In the set: 3 curved rods with 360° adjustable handles: 35, 50 and 60 cm (13.8, 19.7 and 23.6″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£160.00
-
£38.00
-
1-Piece Whale Tail PDR Tool - 100 cm / 5 cm (Tip Size)
Extra-long reach for challenging repair locations. This 100 cm (39.4″) Whale Tail Rod features a 5 cm (2″) flat blade, making it ideal for accessing dents deep inside large panels where shorter tools cannot reach while delivering smooth, controlled pushing force. Best for: repairing dents in large doors, quarter panels, roofs and other deep access areas where extended reach and a wide contact surface improve control. 5 cm (2″) flat whale tail tip spreads force evenly for clean, controlled dent correction 100 cm (39.4″) length reaches deep repair areas with excellent leverage Premium spring steel maintains blade geometry and durability under repeated use Available individually or as part of a complete Whale Tail Set In the box: 1 × 100 cm (39.4″) Whale Tail Rod with a 5 cm (2″) flat tip. Manufactured in our own facility. Backed by a 1-year warranty, 30-day free exchange, and worldwide express shipping with FedEx, UPS & DHL.
£42.00
-
5-Piece Single Bend PDR Rod Set (Sharp Tip - Pointy Tip)
A set of stainless steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions 3 Pointy Tip 60/70/80 cm (23.6/27.6/31.5″) (Ø10 mm (0.39″)) + 2 Sharp Tip 65/85 cm (25.6/33.5″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£151.00
-
Mini Whale Tail PDR Tool - 5.5 cm / 12.5 mm (Tip Size)
A spring steel whale tail rod for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions Measurements: Length: 5.5 cm (2.2″) — Tip width: 1.25 cm (0.5″)Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£26.00
-
PDR Flex Guard Support
Support the panel, protect the line. This support holds hoods, hatches and panels safely in working position while you repair.Best for: holding hoods and hatches open and steady during repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£21.00
-
PDR Pro Edge Hammer Support
Support the panel, protect the line. This support holds hoods, hatches and panels safely in working position while you repair.Best for: holding hoods and hatches open and steady during repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£21.00
-
PDR Knockdown – Standard
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£14.00
-
PDR Blending Hammer 1
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£20.00
-
PDR Hammer and Interchangeble Tips Set 45 pcs
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£151.00
-
Glue tabs for pdr dent - 14465 - 5*43mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 14465 - 5*43mm (1.69″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 14465 - 5*43mm (1.69″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£6.00
-
Glue tabs for pdr dent - 10757 - 5*43mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10757 - 5*43mm (1.69″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 10757 - 5*43mm (1.69″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£6.00
-
Glue tabs for pdr dent - 11332 - 26,5mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11332 - 26,5mm (1.04″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11332 - 26,5mm (1.04″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£6.00
-
Glue tabs for pdr dent - 13727 - 15*15mm Natural- (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 13727 - 15*15mm (0.59″) natural tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 13727 - 15*15mm (0.59″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£6.00
-
Glue tabs for pdr dent - 11333-1- 21,5mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11333-1- 21,5mm (0.04- 0.85″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11333-1- 21,5mm (0.04- 0.85″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£6.00
-
Glue tabs for pdr dent - 12349 - 40*40 mm Green - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12349 - 40*40 mm (1.57″) green tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12349 - 40*40 mm (1.57″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£6.00
-
8-Piece Single Bend PDR Rod Set (Sharp Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors. Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking 30, 40, 50, 60, 70 cm (11.8, 15.7, 19.7, 23.6, 27.6″), Ø6, 6, 8 mm (0.24, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£118.00
-
PDR 1 kg Silicon Yellow Color High Quality ( Winter )
The bond your pull depends on. Formulated for PDR glue pulling: strong grip on tabs and panel, clean release with alcohol, no residue on the paint.Best for: glue-pull repairs in all seasons – check listing for temperature grade. Strong tab-to-panel bond for confident pulls Releases cleanly with standard release agents Consistent melt behaviour in standard glue guns No residue, no paint damage Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£42.00 £34.00
-
9 LED Professional PDR Dent Inspection Light with Mobile Stand
The Auto-TR 9 LED Professional PDR Inspection Light with Mobile Stand is designed for professional paintless dent repair applications where a large, stable and easily adjustable lighting system is required. Equipped with 9 LEDs — 3 yellow, 3 white and 3 green — the light creates clear reflection lines across the vehicle panel, helping technicians accurately identify dents, high spots, low spots and surface irregularities during the repair process. The heavy-duty mobile floor stand provides a stable working platform while the caster wheels make it easy to reposition the light around the vehicle. The adjustable support structure allows the lamp position and working angle to be changed according to the panel being repaired. For maximum flexibility, the system offers dual power operation. It can be operated with a rechargeable battery for cordless mobility or connected directly to a power source when continuous operation is required. A VIKO extension cable is also included for convenient workshop use. Key Features 9 LED configuration: 3 Yellow + 3 White + 3 Green Three-color reflection for precise dent detection Professional mobile floor stand Wheeled base for easy movement around the vehicle Adjustable lamp position and working angle Rechargeable battery operation Plug-in operation for continuous workshop use VIKO extension cable included Stable metal support structure Designed specifically for professional Paintless Dent Repair (PDR) Helps identify dents, high spots, low spots and panel irregularities Suitable for PDR workshops and professional dent repair technicians
£377.00
-
PDR Kickstart Pulling Set
Pull the dent from the outside. This glue-pulling package combines the tabs, hardware and finishing tools needed to repair dents with no rear access – on aluminium panels, braced sections and modern boxed structures.Best for: panels where rod access is blocked or risky. Tab profiles for different dent shapes and sizes Pulling hardware for measured force No drilling, no paint damage Finishing tools included where listed Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£34.00
-
PDR Fender Correction Kit
Purpose-built for fender access and edge work.Best for: fender lips, arches and edge repairs. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£118.00
-
PDR Simes White Wax Silicone
The bond your pull depends on. Formulated for PDR glue pulling: strong grip on tabs and panel, clean release with alcohol, no residue on the paint.Best for: glue-pull repairs in all seasons – check listing for temperature grade. Strong tab-to-panel bond for confident pulls Releases cleanly with standard release agents Consistent melt behaviour in standard glue guns No residue, no paint damage Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£17.00
-
PDR Narrow Airbag
Grip without glue. This suction tool anchors to the panel for holding, positioning and light pulling tasks – instant attach, instant release.Best for: quick holds, positioning and light pulling without adhesives. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
£17.00
You have seen 144 out of 231 products