Stainless Steel Tools

Stainless stiffness, double bend reach, swappable tips. This 6-piece set combines corrosion-proof stainless shafts with double bend geometry and 5/16-18 threaded ends, giving you obstructed-section access with the tip profile of your choice.Best for: braced sections and humid-climate shops where spring steel needs extra corrosion care. Stainless steel shafts – no rust, minimal maintenance Double bend profile clears braces and inner structures 5/16-18 threaded ends accept standard interchangeable tips Six rods covering graduated lengths Measurements: Lengths: 90 / 100 / 120 cm (35.4 / 39.4 / 47.2″) — Diameters: Ø12 / Ø14 mm (0.47 / 0.55″)Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A stainless steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. Stainless Steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A set of stainless steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions 3 Pointy Tip 60/70/80 cm (23.6/27.6/31.5″) (Ø10 mm (0.39″)) + 2 Sharp Tip 65/85 cm (25.6/33.5″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. stainless steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions 65 / 85 cm (25.6 / 33.5″), Ø10 mm (0.39″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors. Best for: open-panel repairs on hoods, roofs and doors. stainless steel construction – controlled flex, no kinking Comfort grip for extended sessions 60 / 70 / 80 cm (23.6 / 27.6 / 31.5″), Ø10 mm (0.39″) Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

Reach the dents straight rods can't. This 10-piece curved PDR rod set is shaped for tight, awkward access points – behind door braces, inside quarter panels and under hood edges – where a straight rod loses leverage before it reaches the dent. Best for: door panels, fenders, quarter panels and complex hail damage on curved body lines. Stainless steel construction – flexes under load and snaps back without kinking Progressive curve profiles – shallow sweeps for panel work, deep bends for boxed sections Five lengths, three diameters – thin short rods for precision, thick long rods for leverage Comfort-grip handles on every rod In the set: 10 curved rods covering 20–30-40-45-60 cm (7.9–11.8-15.7-17.7-23.6″) in Ø5, Ø6 and Ø8 mm (0.20, 0.24 and 0.31″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A set of stainless steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist. Best for: awkward angles – set the handle to the panel instead of fighting your wrist. stainless steel construction – controlled flex, no kinking 30-40-50-60 cm (12", 16", 20″, 24"), Ø10 mm (0.4″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

Rotate the handle, not your body. These three curved rods carry 360° adjustable handles that lock at any angle, so in cramped working positions you set the grip to suit your stance and keep full control of the tip. Best for: awkward working positions – kneeling at sills, reaching over engine bays, working under-panel. 360° locking handles – any grip angle, locked solid Curved shafts for access around edges and braces 35 / 50 / 60 cm (13.8 / 19.7 / 23.6″) lengths, Ø6–8 mm (0.24–0.31″) stainless steel Reduces wrist fatigue on long repair sessions In the set: 3 curved rods with 360° adjustable handles: 35, 50 and 60 cm (13.8, 19.7 and 23.6″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A set of stainless steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist. Best for: awkward angles – set the handle to the panel instead of fighting your wrist. stainless steel construction – controlled flex, no kinking 40, 60, 90 cm (15.7, 23.6, 35.4″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A stainless steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections. Best for: pull-direction corrections inside doors and boxed sections. stainless steel construction – controlled flex, no kinking 20, 20, 25 cm (7.9, 7.9, 9.8″), Ø5, 6, 5 mm (0.20, 0.24, 0.20″) – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. Stainless Steel construction – controlled flex, no kinking 20, 25 cm (7.9, 9.8″), Ø5, 6 mm (0.20, 0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less

A set of spring steel hook rods for paintless dent repair, built for pull-direction corrections inside doors and boxed sections. Best for: pull-direction corrections inside doors and boxed sections. stainless steel construction – controlled flex, no kinking 70 cm (27.6″), Ø10 mm (0.39″) – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.

Read more less