SAVE100 Eligible Products
-
3-Piece PDR Hook Set (Sharp Tip)
A set of spring steel hook rods for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. Spring Steel construction – controlled flex, no kinking 45, 60, 90 cm (17.7, 23.6, 35.4″), Ø5, 5, 6 mm (0.20, 0.20, 0.24″) – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€130,00
-
PDR 360° Rotating Lifter
Pull the dent from the outside. This glue-pulling package combines the tabs, hardware and finishing tools needed to repair dents with no rear access – on aluminium panels, braced sections and modern boxed structures.Best for: panels where rod access is blocked or risky. Tab profiles for different dent shapes and sizes Pulling hardware for measured force No drilling, no paint damage Finishing tools included where listed Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€65,00
-
PDR Lamp for Car Body Repair 6 LED warm and cold
You can only fix the dent you can see. This PDR light strips the panel of guesswork, throwing line-board reflections that reveal every high spot, crown and low – before, during and after the push.Best for: reading dents accurately on any panel, in shop or mobile use. High-CRI LED output for true panel reading Adjustable positioning to sweep reflections across the dent Suitable for shop and mobile setups Pairs with our PDR stands Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€230,00
-
Double Bend T-Handle PDR Rod - 80 cm / 10 mm (Sharp Tip)
A spring steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. spring steel construction – controlled flex, no kinking 80 cm (31.5″), Ø10 mm (0.39″) – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€65,00
-
PDR Door Fixing Apparatus Black
Purpose-built for door work. Protects the glass and trim line while you access the skin.Best for: door skin access and protection during repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€35,00
-
3-Piece Single Bend T-Handle PDR Rod Set (Rounded Ball Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. spring steel construction – controlled flex, no kinking 50, 60, 70 cm (19.7, 23.6, 27.6″), Ø8, 10, 12 mm (0.31, 0.39, 0.47″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€85,00
-
2-Piece Single Bend Curved PDR Rod Set - 45 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 45 cm (17.7″), Ø6 mm (0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00
-
PDR 6 Led Professional Lamp ( 3 Yellow 3 White )
You can only fix the dent you can see. This PDR light strips the panel of guesswork, throwing line-board reflections that reveal every high spot, crown and low – before, during and after the push.Best for: reading dents accurately on any panel, in shop or mobile use. High-CRI LED output for true panel reading Adjustable positioning to sweep reflections across the dent Suitable for shop and mobile setups Pairs with our PDR stands Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€339,00
-
Adjustable Handle 360 Degree - 60cm/8mm
A spring steel adjustable-handle rod for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 60 cm (23.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€65,00
-
Double Bend Angled PDR Rod - 60 cm / 8 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm (23.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00
-
7-Piece Adjustable Handle PDR Rod Set - Hook (Round Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist. Best for: awkward angles – set the handle to the panel instead of fighting your wrist. Spring Steel construction – controlled flex, no kinking Comfort grip for extended sessions Measurements: Ø6 mm (0.24″) — 30 / 40 / 50 cm (11.8 / 15.7 / 19.7″) · Ø8 mm (0.31″) — 50 / 60 / 70 / 70 cm (19.7 / 23.6 / 27.6 / 27.6″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€235,00
-
PDR H-Shaped Hanging Bracket
Hang your rods where you work. This hanging bracket mounts to the vehicle and holds tools at hand height – no more bending to the floor between pushes.Best for: keeping rods, tails and finishing tools within reach at the repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€30,00
-
PDR 26 Pcs Rotatable and Tactical Handle Stainless Steel Rod Set
A complete PDR package assembled from our in-house manufactured tools.Best for: technicians who want a ready-to-work dent removal setup. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€832,00
-
6-Piece Double Bend PDR Tool Set Interchangeable Tip - 5/16 Thread Size
Stainless stiffness, double bend reach, swappable tips. This 6-piece set combines corrosion-proof stainless shafts with double bend geometry and 5/16-18 threaded ends, giving you obstructed-section access with the tip profile of your choice.Best for: braced sections and humid-climate shops where spring steel needs extra corrosion care. Stainless steel shafts – no rust, minimal maintenance Double bend profile clears braces and inner structures 5/16-18 threaded ends accept standard interchangeable tips Six rods covering graduated lengths Measurements: Lengths: 90 / 100 / 120 cm (35.4 / 39.4 / 47.2″) — Diameters: Ø12 / Ø14 mm (0.47 / 0.55″)Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€300,00
-
Adjustable Handle 360 Degree - 40cm/8mm
A spring steel adjustable-handle rod for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 40 cm (15.7″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€65,00
-
3-Piece Double Bend - Cross Handle PDR Rod Set (Pointy Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. Spring Steel construction – controlled flex, no kinking 25, 35, 45 cm (9.8, 13.8, 17.7″), Ø5, 6, 8 mm (0.20, 0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€110,00
-
10-Piece Double Bend Brace Tool Set (Round Tip)
Left and right of every brace. This 10-piece double bend set comes in mirrored left/right pairs, so whichever side of an obstruction the dent sits on, there is a rod bent the right way to reach it. Best for: hail repair on braced roofs and hoods, where dents fall on both sides of every reinforcement. Mirrored left/right pairs – no forcing a wrong-handed rod into position Five lengths from 25 to 65 cm (9.8 to 25.6″) cover shallow and deep sections Ø5 / 6 / 8 mm (0.20 / 0.24 / 0.31″) spring steel shafts The most efficient setup for high-count hail work In the set: 10 double bend rods in L/R pairs: 25 / 35 / 45 / 55 / 65 cm (9.8 / 13.8 / 17.7 / 21.7 / 25.6″), Ø5-6–8 mm (0.20-0.24–0.31″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€200,00
-
12-Piece T-Handle PDR Rod Set
Heavy panels need heavy steel. This 12-piece rod set is our workhorse selection for hail-prone areas and large-panel repairs – long, stiff spring steel shafts that transfer real corrective force into hoods, roofs and tailgates.Best for: hail damage, roof and hood panels, and any repair where leverage matters more than finesse. 12 heavy-duty spring steel rods in graduated lengths and diameters Stiff shafts deliver force without washing out in flex Covers large-panel work a compact set can't Comfort grips rated for high-leverage pushing In the set: 12 heavy-duty rods in mixed lengths and diameters (see photos for the full spread).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€275,00
-
Double Bend PDR Rod - 55 cm / 10 mm (Round Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm (21.7″), Ø10 mm (0.39″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Red handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00
-
7-Piece Adjustable Handle PDR Rod Set (Round Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 25, 30, 40, 50, 55, 60, 70 cm (9.8, 11.8, 15.7, 19.7, 21.7, 23.6, 27.6″), Ø6, 8 mm (0.24, 0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€230,00
-
2-Piece Double Bend PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 40 cm (15.7″), Ø5 mm (0.20″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€80,00
-
2-Piece Single Bend Curved PDR Rod Set - 35 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 35 cm (13.8″), Ø6 mm (0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00
-
PDR - Rope Sling
Hang your rods where you work. This hanging bracket mounts to the vehicle and holds tools at hand height – no more bending to the floor between pushes.Best for: keeping rods, tails and finishing tools within reach at the repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€25,00
-
PDR 1 kg Silicon White Color High Quality ( 4 season )
The bond your pull depends on. Formulated for PDR glue pulling: strong grip on tabs and panel, clean release with alcohol, no residue on the paint.Best for: glue-pull repairs in all seasons – check listing for temperature grade. Strong tab-to-panel bond for confident pulls Releases cleanly with standard release agents Consistent melt behaviour in standard glue guns No residue, no paint damage Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€44,00
You have seen 72 out of 240 products