SAVE100 Eligible Products
-
55-Piece Professional PDR Tool Kit
Built for the technician who works every day. The 55-piece professional PDR tool kit brings together our most-used rod styles, handle configurations, specialised bends, whale tails and interchangeable-tip tools in one comprehensive professional dent removal collection.Best for: full-time PDR technicians and shops handling everything from single dents to full hail jobs. Wide range of rod styles and bends for doors, hoods, roofs and quarter panels Whale tails and interchangeable-tip tools included for brace work and precision pushing Spring steel construction – controlled flex without kinking Balanced selection refined from feedback of working technicians In the set: 55 professional tools covering rods, specialised bends, whale tails and interchangeable-tip tools.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€700,00
-
10-Piece Single Bend Curved PDR Rod Set (Sharp Tip) - 20–60cm
Reach the dents straight rods can't. This 10-piece curved PDR rod set is shaped for tight, awkward access points – behind door braces, inside quarter panels and under hood edges – where a straight rod loses leverage before it reaches the dent. Best for: door panels, fenders, quarter panels and complex hail damage on curved body lines. Spring steel construction – flexes under load and snaps back without kinking Progressive curve profiles – shallow sweeps for panel work, deep bends for boxed sections Five lengths, three diameters – thin short rods for precision, thick long rods for leverage Comfort-grip handles on every rod In the set: 10 curved rods covering 20–30-40-45-60 cm (7.9–11.8-15.7-17.7-23.6″) in Ø5, Ø6 and Ø8 mm (0.20, 0.24 and 0.31″). Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€230,00
-
3-Piece Mini Hook PDR Tool Set (Sharp Tip)
A spring steel hook rod for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. spring steel construction – controlled flex, no kinking 20, 20, 25 cm (7.9, 7.9, 9.8″), Ø5, 6, 5 mm (0.20, 0.24, 0.20″) – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€85,00
-
PDR Steel Hammer DM
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€38,00
-
3-Piece Adjustable Handle Rod Set (Round Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 40, 60, 90 cm (15.7, 23.6, 35.4″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€120,00
-
Accordion Hood Stand for Body
Put the light exactly where the dent demands. This PDR stand holds your lamp at working height and angle, freeing both hands for the rod while the reflection stays locked on the repair.Best for: shop and mobile setups with any PDR lamp. Stable base with adjustable height and angle Quick repositioning between panels Folds down for mobile work Fits our PDR lamps Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€295,00
-
4-Piece Adjustable Handle Whale Tail PDR Tool Set - 3cm (Tip Size)
A set of spring steel whale tail rods for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking 10, 20, 40, 60 cm (3.9, 7.9, 15.7, 23.6″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€130,00
-
PDR German Hammer 2 Tips Changable
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€44,00
-
4-Piece Whale Tail PDR Tool Set – 3 cm (Tip Size)
The whale tail range that covers a full repair day. Four flat-blade rods from a 10 cm (3.9″) stub to a 60 cm (23.6″) reach tool, all with a 3 cm (1.2″) tip – wide enough to spread force across the dent, flat enough to slide between panel and brace.Best for: working between double panels, behind braces and along door skins where round rods slip. 3 cm (1.2″) flat tip spreads pushing force for smooth, controlled corrections 10 / 20 / 40 / 60 cm (3.9 / 7.9 / 15.7 / 23.6″) lengths – from tight cavity work to deep panel reach Spring steel blades hold their edge geometry under leverage Also available as single rods if you need one length only In the set: 4 whale tail rods: 10, 20, 40 and 60 cm (3.9, 7.9, 15.7 and 23.6″), all with 3 cm (1.2″) tips.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€90,00
-
M8 Double Bend Interchangeable Rod – 120cm, Ø12mm
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking 120 cm (47.2″), Ø12 mm (0.47″) – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00
-
3-Piece 360° Adjustable Handle Double Bend PDR Rod Set
Rotate the handle, not your body. These three curved rods carry 360° adjustable handles that lock at any angle, so in cramped working positions you set the grip to suit your stance and keep full control of the tip.Best for: awkward working positions – kneeling at sills, reaching over engine bays, working under-panel. 360° locking handles – any grip angle, locked solid Curved shafts for access around edges and braces 35 / 50 / 60 cm (13.8 / 19.7 / 23.6″) lengths, Ø6–8 mm (0.24–0.31″) spring steel Reduces wrist fatigue on long repair sessions In the set: 3 curved rods with 360° adjustable handles: 35, 50 and 60 cm (13.8, 19.7 and 23.6″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€110,00
-
4-Piece Single Bend Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. Spring Steel construction – controlled flex, no kinking 20, 25 cm (7.9, 9.8″), Ø5, 6 mm (0.20, 0.24″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€80,00
-
6-Piece Double Bend Curved PDR Rod Set (Round Tip)
Two bends put the tip where one can't. The double bend geometry of this 6-piece curved rod set lets the shaft clear a brace or inner panel edge and still land the tip flat on the dent – the go-to profile for obstructed repairs.Best for: dents hiding behind braces, reinforcements and inner panel structures. Double bend profile clears obstructions while keeping tip control 25 / 40 / 55 cm (9.8 / 15.7 / 21.7″) lengths for shallow and deep obstructed sections Ø8 mm (0.31″) spring steel – stiffness for real corrective force Comfort grips for high-leverage work In the set: 6 double bend curved rods: 25, 40 and 55 cm (9.8, 15.7 and 21.7″), Ø8 mm (0.31″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€130,00
-
M8 Interchangeable Tip Double Bend Rod 90 cm 12 mm
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking 90 cm (35.4″), Ø12 mm (0.47″) – see the spec panel above for the full breakdown Double Bend profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00
-
6-Piece Curved Hook PDR Rod Set (Sharp Tip)
Hooks that pull the dent toward you. This 6-piece hook PDR rod set puts a curved working tip on compact spring steel shafts, letting you apply force back toward yourself in cavities where a forward push is impossible.Best for: door internals, pillar sections and boxed panels where the dent sits behind the access point. Hook-profile tips for pull-direction corrections Compact 30 / 40 / 45 cm (11.8 / 15.7 / 17.7″) shafts steer easily inside cavities Three diameters (Ø5 / 6 / 8 mm (0.20 / 0.24 / 0.31″)) – match stiffness to panel gauge Spring steel: controlled flex, no kinking In the set: 6 hook rods: 30, 40 and 45 cm (11.8, 15.7 and 17.7″) in Ø5, Ø6 and Ø8 mm (0.20, 0.24 and 0.31″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€165,00
-
M8 Interchangeable Tip Set
This M8-thread interchangeable tip set lets a single rod do the work of a rack: screw on the profile the dent demands – round for smooth pushes, sharp for precise crowns, soft for finishing – and keep working. Best for: technicians running M8 interchangeable rods who want the full tip vocabulary at hand. Standard M8 thread – fits our interchangeable rods and most industry M8 systems Multiple tip profiles for pushing, detailing and finishing Hardened tips hold their geometry Compact organised storage Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€80,00
-
4-Piece Adjustable Handle PDR Rod Set (Round Tip) 25/60 cm
Fits through a door drain hole – customers have proven it. These four adjustable-handle rods (25–50 cm (9.8–19.7″), Ø6 mm (0.24″)) are slim enough to enter through factory openings and the locking handle sets your grip angle so the tip lands square on the dent.Best for: door skins accessed through drain holes and window slots – no trim removal needed. Adjustable locking handle – set the working angle, not your wrist Slim Ø6 mm (0.24″) shafts pass through factory drain holes 25 / 30 / 40 / 50 cm (9.8 / 11.8 / 15.7 / 19.7″) lengths for every door size Spring steel with controlled flex for precise pushes In the set: 4 adjustable-handle rods: 25, 30, 40 and 50 cm (9.8, 11.8, 15.7 and 19.7″), Ø6 mm (0.24″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€120,00
-
U-Shape Whale Tail PDR Tool – Adjustable Handle
A spring steel whale tail rod for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking 60 cm (23.6″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€55,00
-
6-Piece Curved Whale Tail PDR Tool Set - 3 cm (Tip Size)
A set of spring steel whale tail rods for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking 10, 20, 30, 40, 50, 60 cm (3.9, 7.9, 11.8, 15.7, 19.7, 23.6″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€175,00
-
3-Piece 360° Adjustable Handle PDR Rod Set (Round Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. Spring Steel construction – controlled flex, no kinking 40, 50, 60 cm (15.7, 19.7, 23.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€120,00
-
PDR Stand
Put the light exactly where the dent demands. This PDR stand holds your lamp at working height and angle, freeing both hands for the rod while the reflection stays locked on the repair.Best for: shop and mobile setups with any PDR lamp. Stable base with adjustable height and angle Quick repositioning between panels Folds down for mobile work Fits our PDR lamps Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€300,00
-
6-Piece Single Bend Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 15, 25, 35 cm (5.9, 9.8, 13.8″), Ø5 mm (0.20″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€105,00
-
6-Piece Curved PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30, 45, 60 cm (11.8, 17.7, 23.6″), Ø5, 6, 8 mm (0.20, 0.24, 0.31″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€160,00
-
15-Piece Complete Whale Tail PDR Rod Set – 3cm Tip
Every whale tail you will ever reach for. Fifteen flat-blade rods in 5–10 cm (2–3.9″) increments from 10 to 110 cm (3.9 to 43.3″) mean the lever length always matches the job – no compromising with a blade that is too short to reach or too long to control.Best for: professional shops that want the exact right whale tail for every panel and every brace. 15 lengths: 10–110 cm (3.9–43.3″) in fine increments for precise lever matching 3 cm (1.2″) (1.2") flat tips across the whole set Spring steel blades – consistent flex character from shortest to longest The complete professional whale tail wall, in one purchase In the set: 15 whale tails: 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 70 / 80 / 90 / 110 cm (3.9 / 5.9 / 7.9 / 9.8 / 11.8 / 13.8 / 15.7 / 17.7 / 19.7 / 21.7 / 23.6 / 27.6 / 31.5 / 35.4 / 43.3″).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€280,00
You have seen 24 out of 240 products