SAVE100 Eligible Products
-
PDR Blending Hammer 1
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€32,00
-
PDR Hammer and Interchangeble Tips Set 45 pcs
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€205,00
-
Glue tabs for pdr dent - 11332 - 26,5mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11332 - 26,5mm (1.04″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11332 - 26,5mm (1.04″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Glue tabs for pdr dent - 13727 - 15*15mm Natural- (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 13727 - 15*15mm (0.59″) natural tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 13727 - 15*15mm (0.59″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Glue tabs for pdr dent - 10259- 35x17mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10259- 35x17mm (1.38x0.67″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 10259- 35x17mm (1.38x0.67″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
3 LED Mini Lamp New Model
You can only fix the dent you can see. This PDR light strips the panel of guesswork, throwing line-board reflections that reveal every high spot, crown and low – before, during and after the push.Best for: reading dents accurately on any panel, in shop or mobile use. High-CRI LED output for true panel reading Adjustable positioning to sweep reflections across the dent Suitable for shop and mobile setups Pairs with our PDR stands Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€120,00
-
PDR Expert Pulling Kick Set
Pull the dent from the outside. This glue-pulling package combines the tabs, hardware and finishing tools needed to repair dents with no rear access – on aluminium panels, braced sections and modern boxed structures.Best for: panels where rod access is blocked or risky. Tab profiles for different dent shapes and sizes Pulling hardware for measured force No drilling, no paint damage Finishing tools included where listed Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€35,00
-
PDR Kickstart Pulling Set
Pull the dent from the outside. This glue-pulling package combines the tabs, hardware and finishing tools needed to repair dents with no rear access – on aluminium panels, braced sections and modern boxed structures.Best for: panels where rod access is blocked or risky. Tab profiles for different dent shapes and sizes Pulling hardware for measured force No drilling, no paint damage Finishing tools included where listed Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€35,00
-
PDR Simes White Wax Silicone
The bond your pull depends on. Formulated for PDR glue pulling: strong grip on tabs and panel, clean release with alcohol, no residue on the paint.Best for: glue-pull repairs in all seasons – check listing for temperature grade. Strong tab-to-panel bond for confident pulls Releases cleanly with standard release agents Consistent melt behaviour in standard glue guns No residue, no paint damage Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€31,00
-
PDR Soft Strike Tip Set
A spring steel interchangeable-tip rod for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€45,00
-
PDR Advanced Metal Wheel Support
Support the panel, protect the line. This support holds hoods, hatches and panels safely in working position while you repair.Best for: holding hoods and hatches open and steady during repair. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€140,00
-
PDR Narrow Airbag
Grip without glue. This suction tool anchors to the panel for holding, positioning and light pulling tasks – instant attach, instant release.Best for: quick holds, positioning and light pulling without adhesives. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€30,00
-
PDR Wide Airbag
Grip without glue. This suction tool anchors to the panel for holding, positioning and light pulling tasks – instant attach, instant release.Best for: quick holds, positioning and light pulling without adhesives. In-house manufactured to our tool-line standard Durable materials for daily shop use Designed alongside our rod and pulling systems See photos for size and configuration Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€25,00
-
PDR Metal Knockdown (Red)
The precision finishing tool. This PDR knockdown concentrates each hammer tap exactly where you place it, levelling high spots and crowns so the repair blends invisibly into the panel.Best for: finishing after the push; detail work on ridges and body lines. Hardened working tip holds its geometry Balanced body for controlled taps Works on steel and aluminium panels Pairs with any blending hammer Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
PDR Blending Hammer 10
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€55,00
-
PDR Blending Hammer 19
Blend the repair to invisible. This PDR blending hammer delivers controlled taps to relax crowns and level high spots after the push – the finishing stage that separates a good repair from an undetectable one.Best for: finishing and blending on every panel; pairs with our knockdowns. Balanced head weight for measured, repeatable taps Comfortable grip for precise control Suitable for steel and aluminium panels Part of our in-house manufactured finishing range Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€35,00
-
Blending Hammer - PDR
- 170 gr (weight)
€50,00
-
Glue tabs for pdr dent - 12077 - 75-50 mm Red - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 12077 - 75-50 mm (2.95-1.97″) red tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 12077 - 75-50 mm (2.95-1.97″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Glue tabs for pdr dent - 10757 - 5*43mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 10757 - 5*43mm (1.69″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 10757 - 5*43mm (1.69″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Glue tabs for pdr dent - 13568 - 49-34mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 13568 - 49-34mm (1.93-1.34″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 13568 - 49-34mm (1.93-1.34″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Glue tabs for pdr dent - 11328-1- 50*28mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11328-1- 50*28mm (1.10″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: large, shallow dents on hoods, roofs and door skins. 11328-1- 50*28mm (1.10″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Glue tabs for pdr dent - 11337- 16,1mm - (10 pack)
Glue-pull tab for paintless dent removal without rear access. This 11337- 16,1mm (0.63″) tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. 11337- 16,1mm (0.63″) pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€10,00
-
Single Bend Cross Handle PDR Rod - 60 cm / 8 mm (Sharp Tip)
A spring steel curved rod for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 60 cm (23.6″), Ø8 mm (0.31″) – see the spec panel above for the full breakdown Curved profile for the intended access geometry Blue handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€60,00
-
3-Piece Single Bend PDR Rod Set (Sharp Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. Spring Steel construction – controlled flex, no kinking 25, 30, 40 cm (9.8, 11.8, 15.7″), Ø5 mm (0.20″) – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€120,00
You have seen 168 out of 240 products