Products
-
10-Piece Brace Tool Set (L/R) (Round Tip)
A set of spring steel brace tools for paintless dent repair, built for working the tight gap between panel and brace.Best for: working the tight gap between panel and brace. spring steel construction – controlled flex, no kinking 15, 25, 35, 45, 60 cm, Ø5, 6, 6, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€130,00
-
10-Piece Double Bend Brace Tool Set (Round Tip)
Left and right of every brace. This 10-piece double bend set comes in mirrored left/right pairs, so whichever side of an obstruction the dent sits on, there is a rod bent the right way to reach it. Best for: hail repair on braced roofs and hoods, where dents fall on both sides of every reinforcement. Mirrored left/right pairs – no forcing a wrong-handed rod into position Five lengths from 25 to 65 cm cover shallow and deep sections Ø5 / 6 / 8 mm spring steel shafts The most efficient setup for high-count hail work In the set: 10 double bend rods in L/R pairs: 25 / 35 / 45 / 55 / 65 cm, Ø5-6–8 mm. Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€200,00 €170,00
-
10-Piece Single Bend Curved PDR Rod Set (Sharp Tip) - 20–60cm
Reach the dents straight rods can't. This 10-piece curved PDR rod set is shaped for tight, awkward access points – behind door braces, inside quarter panels and under hood edges – where a straight rod loses leverage before it reaches the dent. Best for: door panels, fenders, quarter panels and complex hail damage on curved body lines. Spring steel construction – flexes under load and snaps back without kinking Progressive curve profiles – shallow sweeps for panel work, deep bends for boxed sections Five lengths, three diameters – thin short rods for precision, thick long rods for leverage Comfort-grip handles on every rod In the set: 10 curved rods covering 20–30-40-45-60 cm in Ø5, Ø6 and Ø8 mm. Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€199,90
-
10-Piece Single Bend Curved PDR Rod Set (Sharp Tip) - 20–70cm
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. Spring Steel construction – controlled flex, no kinking 20, 30, 45, 60, 70 cm, Ø5, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€199,90
-
10-Piece Tool Set - Brace Tools - Sharp End – 15–60cm
A set of spring steel brace tools for paintless dent repair, built for working the tight gap between panel and brace.Best for: working the tight gap between panel and brace. spring steel construction – controlled flex, no kinking 15, 25, 35, 45, 60 cm, Ø5, 6, 6, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€130,00
-
12-Piece Hand Tool PDR Rod Set (Sharp Tip)
A set of spring steel rods for paintless dent repair, built for open-panel repairs on hoods, roofs and doors.Best for: open-panel repairs on hoods, roofs and doors. Spring Steel construction – controlled flex, no kinking 25, 35, 45, 55, 65, 75 cm, Ø5, 6, 8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€269,90
-
12-Piece T-Handle PDR Rod Set
Heavy panels need heavy steel. This 12-piece rod set is our workhorse selection for hail-prone areas and large-panel repairs – long, stiff spring steel shafts that transfer real corrective force into hoods, roofs and tailgates.Best for: hail damage, roof and hood panels, and any repair where leverage matters more than finesse. 12 heavy-duty spring steel rods in graduated lengths and diameters Stiff shafts deliver force without washing out in flex Covers large-panel work a compact set can't Comfort grips rated for high-leverage pushing In the set: 12 heavy-duty rods in mixed lengths and diameters (see photos for the full spread).Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€240,00
-
14-Piece Centipede Puller Plastic
Glue-pull tab for paintless dent removal without rear access. This multi-size tab bonds to the panel with hot glue and gives your slide hammer or lifter a solid, centred pulling point – then releases cleanly with no mark on the paint.Best for: small, sharp dents and detail pulls. multi-size pulling face, engineered glue-groove surface for maximum bond Works with slide hammers, lifters and pulling bridges Releases cleanly – no paint damage Pack of 10 Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€20,00
-
140-Piece Complete PDR Tool Kit
The complete glue-pull arsenal. This 140-piece PDR kit is built around glue pulling: tabs for every dent size and shape, pulling hardware and finishing tools, so you can repair panels from the outside when there is no access from behind.Best for: glue-pull repairs on aluminium panels, braced sections and anywhere rod access is blocked. Full glue tab assortment – sizes and profiles for sharp dents, shallow waves and large smooth dents Pulling hardware and finishing tools included for start-to-finish repairs Works on steel and aluminium panels without touching the paint Organised case keeps every tab size at hand In the set: 140 pieces of glue-pull tooling: tabs, pulling hardware and finishing tools. (Full contents list on request.)Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€140,00
-
15-Piece Complete Whale Tail PDR Rod Set – 3cm Tip
Every whale tail you will ever reach for. Fifteen flat-blade rods in 5–10 cm increments from 10 to 110 cm mean the lever length always matches the job – no compromising with a blade that is too short to reach or too long to control.Best for: professional shops that want the exact right whale tail for every panel and every brace. 15 lengths: 10–110 cm in fine increments for precise lever matching 3 cm (1.2") flat tips across the whole set Spring steel blades – consistent flex character from shortest to longest The complete professional whale tail wall, in one purchase In the set: 15 whale tails: 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 70 / 80 / 90 / 110 cm.Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€235,00
-
2-Piece Adjustable Handle 360 Degree - 90cm/8mm (Sharp Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 90 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€89,90
-
2-Piece Adjustable Handle PDR Rod Set (Round Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 40, 60 cm, Ø8 mm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€89,90
-
2-Piece Adjustable Handle PDR Rod Set (Sharp Tip)
A set of spring steel adjustable-handle rods for paintless dent repair, built for awkward angles – set the handle to the panel instead of fighting your wrist.Best for: awkward angles – set the handle to the panel instead of fighting your wrist. spring steel construction – controlled flex, no kinking 45, 65 cm, Ø10 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€89,90
-
2-Piece Curved PDR Rod Set – 30cm, Ø5mm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 30 cm, Ø5 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Black handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
2-Piece Double Bend Curved PDR Rod Set (Round Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 45 cm, Ø6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Green handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
2-Piece Double Bend PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 40 cm, Ø5 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€64,90
-
2-Piece Hook Tool Set (Sharp Tip)
A set of spring steel hook rods for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. spring steel construction – controlled flex, no kinking 70 cm, Ø10 mm – see the spec panel above for the full breakdown Hook profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€99,90
-
2-Piece Short Hook Tool Set (Sharp Tip)
A set of spring steel hook rods for paintless dent repair, built for pull-direction corrections inside doors and boxed sections.Best for: pull-direction corrections inside doors and boxed sections. spring steel construction – controlled flex, no kinking 40, 60 cm, Ø5 mm – see the spec panel above for the full breakdown Hook profile for the intended access geometry Black handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€64,90
-
2-Piece Single Bend Curved PDR Rod Set - 35 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 35 cm, Ø6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
2-Piece Single Bend Curved PDR Rod Set - 45 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 45 cm, Ø6 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Yellow handle for quick identification in the kit Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
2-Piece Single Bend Curved PDR Rod Set - 55 cm (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges.Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking 55 cm, Ø8 mm – see the spec panel above for the full breakdown Curved profile for the intended access geometry Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€54,90
-
2-Piece Single Bend PDR Rod Set (Sharp Tip)
A set of spring steel curved rods for paintless dent repair, built for tight access points – behind braces, inside quarter panels and under hood edges. Best for: tight access points – behind braces, inside quarter panels and under hood edges. spring steel construction – controlled flex, no kinking Single Bend profile for the intended access geometry Comfort grip for extended sessions 65 / 85 cm, Ø10 mm Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€110,00
-
2-Piece Whale Tail PDR Tool Set - 3 cm (Tip Size)
A set of spring steel whale tail rods for paintless dent repair, built for brace work and double panels where round rods slip.Best for: brace work and double panels where round rods slip. spring steel construction – controlled flex, no kinking 20, 40 cm – see the spec panel above for the full breakdown Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€70,00 €54,90
-
20-Piece 5/16- 18 Size Tip Set
A set of spring steel interchangeable-tip rods for paintless dent repair, built for technicians who match the tip profile to the dent instead of the rod.Best for: technicians who match the tip profile to the dent instead of the rod. spring steel construction – controlled flex, no kinking Comfort grip for extended sessions Manufactured in our own facility. 1-year warranty, 30-day free exchange, worldwide express shipping with FedEx, UPS & DHL.
€100,00
You have seen 24 out of 214 products